Pat Pannuto

Ah, I looked at https://github.com/tock/libtock-c/commit/d4cb0c3c8608a8d4227d2dc164666b44b57225b0 now. Short answer, no. That's actually what I tried the first time for newlib/libc++, and how I eventually ended up with the extra directory. `%`...

I *think* everything assumes no spaces between number and unit On Thu, Mar 16, 2017 at 22:16 Neal Jackson wrote: > well this is just wrong: > > The following...

It hasn't been touched in 3 years; probably makes sense to archive it. I put a notice on the front page readme and will mark it archived now. (n.b. can...

It also gets unhappy when corrupt (probably interpreted as serial control things) characters come through, resulting in an empty message: ``` [2018-05-27 17:41:24.914210] [ 80623] Disconnected. Attempting to reconnect [2018-05-28...

Arudino manages this in hardware. It uses a DTR transition to trigger a timer, so a reset pulse is emitted on a DTR transition, but the steady state of DTR...

Interesting (and cool, nice work). My understanding is that Arduino adds the unbalanced resistors to lengthen the reset pulse. What does the reset pulse with just the cap look like...

@shaneleonard could you grab a scope trace probing both sides (DTR and RESET_N) of the cap? @brghena assuming that looks good, moving hail over to a cap probably a good...

I think that cap choice is fine. Strictly speaking, it'd probably be good to double check in the datasheet that the reset pin is 4.2V tolerant and that this doesn't...

Quick follow-up on those parts, the I2C isolator is actually the more challenging package. I had maybe a 75% success rate on hand-soldering those on first try, 90% on the...

I thought you had to be able to supply 500 mA to be USB compliant (even a "passive hub" ?). Not that lowering the power draw is a bad idea,...