SoapyAirspy

SoapyAirspy copied to clipboard

I'm messing around with the pack option and noticed this post (also told by the developer) that 12Msps is supported by the Airspy R2 firmware with pack on. This also...

alphafox02

No error checking / validation of sample rates

2

If you request a sample rate that is not supported by the hardware, then no error is reported but the sample rate is not used. There's no error checking or...

mutability

Implement Gain

3

- [x] VGA, MIXER, LNA - [ ] LINEARITY, SENSITIVITY?

cjcliffe

Silence in WAV

1

Hello, I'm using this command on a raspberry with an airspy mini: ./rx_fm -E wav -d driver=airspy -f 137.9125M -g LNA=14 - | /usr/bin/sox -t wav -e signed-integer -b 16...

Akito01

rx_fm using SoapySDR with Airspy mini won't terminate

3

Hi, I'm using rx_fm, which uses the SoapySDR, with an Airspy Mini. The problem is that it won't terminate, the process stays there, using 100% of a processor. I never...

Nikotine1

Allow adjustment of IF bandwidth.

1

After some interesting discussions with the Airspy developer on Twitter, he pointed at some source code from LinRad which provides information on what registers to set (using airspy_r820t_write) to adjust...

darksidelemm

Airspy readstream error from soapy_power

8

  Everything appears to go well with the connection between the SoapySDR Remote server and my client until I try to run soapy_power....

jlobingier1

Startup signal glitch

1

using rtl_airband or CubicSDR mostly when i startup my Airspy R2 i see a really poor noise floor, have to stop /start a few times to get it where it...

starvald

Reading speed & errors

23

First of all thanks for the effort on this, its been very useful for me so far. I have run into a performance issue I didn't think would be a...

dgorissen

cjcliffe