Ian Scott
Ian Scott
I just realized that this is a dupe of #175.
Thanks for the reports! DOS 3.3 shouldn't be an issue. There have been some fixes over the past few firmware releases to improve bus reaction time and reduce the amount...
The pico-extras library I use for I2S audio out also has a SPDIF audio out module, so integrating that would actually be pretty simple! And the UART TX header on...
+1, that value should be fine. The [MIDI electrical specification](https://www.midi.org/specifications-old/item/midi-din-electrical-specification) says the ferrites are optional, so in a pinch you can bridge L1 and L2.
I've used Tyrian 2000 from GoG for most of my testing, so that's a known good setup. @mikboy018 if your PSRAM is bad/marginal, that would affect GUS playback but none...
Your autoexec.bat looks OK to me - doesn’t look like anything should conflict. This is feeling like a DMA issue to me given the behavior you’ve described so far. Thanks...
Well, I pulled my 440LX chipset motherboard (which I had never tested before) out of storage and all of the caps on the board are bad and it won't boot....
I'm glad you've sorted things out! I haven't really used Win9x's MS-DOS mode so I hadn't thought about how that'd change your SB32's settings. An IRQ conflict definitely explains the...
Is the issue audible in non-GUS modes? If it’s only on GUS that points to faulty PSRAM chip (U8) or a soldering issue around that chip. It’s not used in...
Hi, being able to do that would be amazing. If you have any code examples I'd be very interested!