platform-ststm32

platform-ststm32 copied to clipboard

STM32F103RE_creality - No DFU capable USB device found

1

Trying to upload on Linux Mint 5.13. I've installed the udev rules and confirmed the group permissions. The USB device appears to be present. ``` [72562.711131] usb 1-4: new full-speed...

mtthw-meyer

Per https://community.platformio.org/t/please-update-jlink-to-v770a/29184. V7.70a is released at the 11.08.2022 (https://www.segger.com/downloads/jlink/), PIO still is at v7.50 (https://registry.platformio.org/tools/platformio/tool-jlink/versions).

maxgerhardt

ST-LINKv2 / STM32L0 / Unable to connect to the target

3

* Platform: Platformio * Processor: STM32L082 * Upload protocol: stlink * Uploader: Original ST-Linkv2 (5 wires connected) - Problem: Not able to connect and upload bin file to stm32 when...

JeroenIoT

Support the latest version of [STM32CubeF7](https://github.com/STMicroelectronics/STM32CubeF7/tree/v1.17.0) Thanks

truongn1

Code Upload Problem with STM32F103C8T6 BluePill and Stlink

1

i have an stm32 blue pill board , i wrote for it a simple GPIO driver , and set the upload protocol to stlink , strange enough it doesnt work...

mahmoodfathy

BUG: Debug process using "PIO Debug (skip Pre-Debug)" does not work as expected

5

## Problem: Using "PIO Debug (skip Pre-Debug)" in VSCODE does build sources again, instead of just launch debug. Same happened when using "PIO Debug" : sources are built twice (one...

Copper-Bot

use stlink-v2 cannot upload firmware

1

xPack OpenOCD x86_64 Open On-Chip Debugger 0.11.0+dev (2021-10-16-21:19) Licensed under GNU GPL v2 For bug reports, read http://openocd.org/doc/doxygen/bugs.html debug_level: 1 hla_swd Error: init mode failed (unable to connect to the...

gyxkgz

Add support for LoRa E5 Dev Board

4

Closes #596. Can be squashed.

nobodywasishere

I've faced an issue with flashing some stm32 microcontrollers, built-in utility stm32flash throws segmentation fault error (11) when trying to flash these controllers with a memory offset more that some...

lex-zhu

Add Arduino Pro Portenta X8 to your supported board list

1

https://docs.arduino.cc/hardware/portenta-x8 - [ ] **Development Platform or Board**. All issues (building, uploading, adding new boards, etc.) related to PlatformIO development platforms should be reported to appropriate repository related to your...

Maisyyarden