upload_port not works in case of FUSES command

[Gusev-Roman]

PS C:\Users\bardc\Documents\PlatformIO\Projects\blinker> c:/users/bardc/.platformio/penv/Scripts/pio run --target fuses --verbose Processing windows (upload_protocol: jtagmkI; upload_flags: -e; upload_port: COM17; monitor_port: COM17; platform: atmelavr; board: ATmega128; framework: arduino; board_build.f_cpu: 15000000L) -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------CONFIGURATION: https://docs.platformio.org/page/boards/atmelavr/ATmega128.html PLATFORM: Atmel AVR (5.0.0) > ATmega128/A HARDWARE: ATMEGA128 15MHz, 4KB RAM, 128KB Flash DEBUG: Current (simavr) External (simavr) PACKAGES:

• framework-arduino-avr-megacore @ 3.0.0
• tool-avrdude @ 1.70200.0 (7.2.0)
• toolchain-atmelavr @ 1.70300.191015 (7.3.0) LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf LDF Modes: Finder ~ chain, Compatibility ~ soft Found 9 compatible libraries Scanning dependencies... No dependencies Building in release mode

TARGET CONFIGURATION:

Target = atmega128 Clock speed = 15000000L Oscillator = external BOD level = 2.7v Save EEPROM = yes Bootloader type = urboot UART port = uart0 JTAG enable = no

Selected fuses: [lfuse = 0xbf, hfuse = 0xc7, efuse = 0xff] avrdude -p atmega128 -C C:\Users\bardc.platformio\packages\tool-avrdude\avrdude.conf -e -c jtagmkI -e -Ulock:w:0xff:m -Uhfuse:w:0xc7:m -Ulfuse:w:0xbf:m -Uefuse:w:0xff:m avrdude error: cannot open port /dev/ttyS0: \xd1\xe8\xf1\xf2\xe5\xec\xe5 \xed\xe5 \xf3\xe4\xe0\xe5\xf2\xf1\xff \xed\xe0\xe9\xf2\xe8 \xf3\xea\xe0\xe7\xe0\xed\xed\xfb\xe9 \xef\xf3\xf2\xfc.

avrdude error: unable to open programmer jtagmkI on port /dev/ttyS0

What is "target configuration port"?? "upload" works fine!