Removal of '#nullable disable' from the Libplanet.Net project (swarm)

[s2quake]

🔪 This PR contains only swarm-related code.

[pull-request-quantifier-deprecated[bot]]

This PR has 87 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

---

Quantification details

Label      : Small
Size       : +42 -45
Percentile : 34.8%

Total files changed: 4

Change summary by file extension:
.cs : +42 -45

Change counts above are quantified counts, based on the PullRequestQuantifier customizations.

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean:

• Fast and predictable releases to production:
  • Optimal size changes are more likely to be reviewed faster with fewer iterations.
  • Similarity in low PR complexity drives similar review times.
• Review quality is likely higher as complexity is lower:
  • Bugs are more likely to be detected.
  • Code inconsistencies are more likely to be detected.
• Knowledge sharing is improved within the participants:
  • Small portions can be assimilated better.
• Better engineering practices are exercised:
  • Solving big problems by dividing them in well contained, smaller problems.
  • Exercising separation of concerns within the code changes.

What can I do to optimize my changes

• Use the PullRequestQuantifier to quantify your PR accurately
  • Create a context profile for your repo using the context generator
  • Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the Excluded section from your prquantifier.yaml context profile.
  • Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your prquantifier.yaml context profile.
  • Only use the labels that matter to you, see context specification to customize your prquantifier.yaml context profile.
• Change your engineering behaviors
  • For PRs that fall outside of the desired spectrum, review the details and check if:
    • Your PR could be split in smaller, self-contained PRs instead
    • Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR).

How to interpret the change counts in git diff output

• One line was added: +1 -0
• One line was deleted: +0 -1
• One line was modified: +1 -1 (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion)
• Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

---

Was this comment helpful? :thumbsup:  :ok_hand:  :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

[pull-request-quantifier-deprecated[bot]]

This PR has 90 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

---

Quantification details

Label      : Small
Size       : +45 -45
Percentile : 36%

Total files changed: 5

Change summary by file extension:
.md : +3 -0
.cs : +42 -45

Change counts above are quantified counts, based on the PullRequestQuantifier customizations.

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean:

• Fast and predictable releases to production:
  • Optimal size changes are more likely to be reviewed faster with fewer iterations.
  • Similarity in low PR complexity drives similar review times.
• Review quality is likely higher as complexity is lower:
  • Bugs are more likely to be detected.
  • Code inconsistencies are more likely to be detected.
• Knowledge sharing is improved within the participants:
  • Small portions can be assimilated better.
• Better engineering practices are exercised:
  • Solving big problems by dividing them in well contained, smaller problems.
  • Exercising separation of concerns within the code changes.

What can I do to optimize my changes

• Use the PullRequestQuantifier to quantify your PR accurately
  • Create a context profile for your repo using the context generator
  • Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the Excluded section from your prquantifier.yaml context profile.
  • Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your prquantifier.yaml context profile.
  • Only use the labels that matter to you, see context specification to customize your prquantifier.yaml context profile.
• Change your engineering behaviors
  • For PRs that fall outside of the desired spectrum, review the details and check if:
    • Your PR could be split in smaller, self-contained PRs instead
    • Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR).

How to interpret the change counts in git diff output

• One line was added: +1 -0
• One line was deleted: +0 -1
• One line was modified: +1 -1 (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion)
• Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

---

Was this comment helpful? :thumbsup:  :ok_hand:  :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

[limebell]

Build seems to fail 😢

[s2quake]

This PR needs to be updated after merge https://github.com/planetarium/libplanet/pull/3669

[pull-request-quantifier-deprecated[bot]]

This PR has 100 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

---

Quantification details

Label      : Small
Size       : +55 -45
Percentile : 40%

Total files changed: 5

Change summary by file extension:
.md : +13 -0
.cs : +42 -45

Change counts above are quantified counts, based on the PullRequestQuantifier customizations.

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean:

• Fast and predictable releases to production:
  • Optimal size changes are more likely to be reviewed faster with fewer iterations.
  • Similarity in low PR complexity drives similar review times.
• Review quality is likely higher as complexity is lower:
  • Bugs are more likely to be detected.
  • Code inconsistencies are more likely to be detected.
• Knowledge sharing is improved within the participants:
  • Small portions can be assimilated better.
• Better engineering practices are exercised:
  • Solving big problems by dividing them in well contained, smaller problems.
  • Exercising separation of concerns within the code changes.

What can I do to optimize my changes

• Use the PullRequestQuantifier to quantify your PR accurately
  • Create a context profile for your repo using the context generator
  • Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the Excluded section from your prquantifier.yaml context profile.
  • Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your prquantifier.yaml context profile.
  • Only use the labels that matter to you, see context specification to customize your prquantifier.yaml context profile.
• Change your engineering behaviors
  • For PRs that fall outside of the desired spectrum, review the details and check if:
    • Your PR could be split in smaller, self-contained PRs instead
    • Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR).

How to interpret the change counts in git diff output

• One line was added: +1 -0
• One line was deleted: +0 -1
• One line was modified: +1 -1 (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion)
• Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

---

Was this comment helpful? :thumbsup:  :ok_hand:  :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

[pull-request-quantifier-deprecated[bot]]

This PR has 100 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

---

Quantification details

Label      : Small
Size       : +55 -45
Percentile : 40%

Total files changed: 5

Change summary by file extension:
.md : +13 -0
.cs : +42 -45

Change counts above are quantified counts, based on the PullRequestQuantifier customizations.

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean:

• Fast and predictable releases to production:
  • Optimal size changes are more likely to be reviewed faster with fewer iterations.
  • Similarity in low PR complexity drives similar review times.
• Review quality is likely higher as complexity is lower:
  • Bugs are more likely to be detected.
  • Code inconsistencies are more likely to be detected.
• Knowledge sharing is improved within the participants:
  • Small portions can be assimilated better.
• Better engineering practices are exercised:
  • Solving big problems by dividing them in well contained, smaller problems.
  • Exercising separation of concerns within the code changes.

What can I do to optimize my changes

• Use the PullRequestQuantifier to quantify your PR accurately
  • Create a context profile for your repo using the context generator
  • Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the Excluded section from your prquantifier.yaml context profile.
  • Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your prquantifier.yaml context profile.
  • Only use the labels that matter to you, see context specification to customize your prquantifier.yaml context profile.
• Change your engineering behaviors
  • For PRs that fall outside of the desired spectrum, review the details and check if:
    • Your PR could be split in smaller, self-contained PRs instead
    • Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR).

How to interpret the change counts in git diff output

• One line was added: +1 -0
• One line was deleted: +0 -1
• One line was modified: +1 -1 (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion)
• Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

---

Was this comment helpful? :thumbsup:  :ok_hand:  :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

[pull-request-quantifier-deprecated[bot]]

This PR has 100 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

---

Quantification details

Label      : Small
Size       : +55 -45
Percentile : 40%

Total files changed: 5

Change summary by file extension:
.md : +13 -0
.cs : +42 -45

Change counts above are quantified counts, based on the PullRequestQuantifier customizations.

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean:

• Fast and predictable releases to production:
  • Optimal size changes are more likely to be reviewed faster with fewer iterations.
  • Similarity in low PR complexity drives similar review times.
• Review quality is likely higher as complexity is lower:
  • Bugs are more likely to be detected.
  • Code inconsistencies are more likely to be detected.
• Knowledge sharing is improved within the participants:
  • Small portions can be assimilated better.
• Better engineering practices are exercised:
  • Solving big problems by dividing them in well contained, smaller problems.
  • Exercising separation of concerns within the code changes.

What can I do to optimize my changes

• Use the PullRequestQuantifier to quantify your PR accurately
  • Create a context profile for your repo using the context generator
  • Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the Excluded section from your prquantifier.yaml context profile.
  • Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your prquantifier.yaml context profile.
  • Only use the labels that matter to you, see context specification to customize your prquantifier.yaml context profile.
• Change your engineering behaviors
  • For PRs that fall outside of the desired spectrum, review the details and check if:
    • Your PR could be split in smaller, self-contained PRs instead
    • Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR).

How to interpret the change counts in git diff output

• One line was added: +1 -0
• One line was deleted: +0 -1
• One line was modified: +1 -1 (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion)
• Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

---

Was this comment helpful? :thumbsup:  :ok_hand:  :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

[pull-request-quantifier-deprecated[bot]]

This PR has 100 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

---

Quantification details

Label      : Small
Size       : +55 -45
Percentile : 40%

Total files changed: 5

Change summary by file extension:
.md : +13 -0
.cs : +42 -45

Change counts above are quantified counts, based on the PullRequestQuantifier customizations.

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean:

• Fast and predictable releases to production:
  • Optimal size changes are more likely to be reviewed faster with fewer iterations.
  • Similarity in low PR complexity drives similar review times.
• Review quality is likely higher as complexity is lower:
  • Bugs are more likely to be detected.
  • Code inconsistencies are more likely to be detected.
• Knowledge sharing is improved within the participants:
  • Small portions can be assimilated better.
• Better engineering practices are exercised:
  • Solving big problems by dividing them in well contained, smaller problems.
  • Exercising separation of concerns within the code changes.

What can I do to optimize my changes

• Use the PullRequestQuantifier to quantify your PR accurately
  • Create a context profile for your repo using the context generator
  • Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the Excluded section from your prquantifier.yaml context profile.
  • Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your prquantifier.yaml context profile.
  • Only use the labels that matter to you, see context specification to customize your prquantifier.yaml context profile.
• Change your engineering behaviors
  • For PRs that fall outside of the desired spectrum, review the details and check if:
    • Your PR could be split in smaller, self-contained PRs instead
    • Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR).

How to interpret the change counts in git diff output

• One line was added: +1 -0
• One line was deleted: +0 -1
• One line was modified: +1 -1 (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion)
• Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

---

Was this comment helpful? :thumbsup:  :ok_hand:  :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

[pull-request-quantifier-deprecated[bot]]

This PR has 100 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

---

Quantification details

Label      : Small
Size       : +55 -45
Percentile : 40%

Total files changed: 5

Change summary by file extension:
.md : +13 -0
.cs : +42 -45

Change counts above are quantified counts, based on the PullRequestQuantifier customizations.

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean:

• Fast and predictable releases to production:
  • Optimal size changes are more likely to be reviewed faster with fewer iterations.
  • Similarity in low PR complexity drives similar review times.
• Review quality is likely higher as complexity is lower:
  • Bugs are more likely to be detected.
  • Code inconsistencies are more likely to be detected.
• Knowledge sharing is improved within the participants:
  • Small portions can be assimilated better.
• Better engineering practices are exercised:
  • Solving big problems by dividing them in well contained, smaller problems.
  • Exercising separation of concerns within the code changes.

What can I do to optimize my changes

• Use the PullRequestQuantifier to quantify your PR accurately
  • Create a context profile for your repo using the context generator
  • Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the Excluded section from your prquantifier.yaml context profile.
  • Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your prquantifier.yaml context profile.
  • Only use the labels that matter to you, see context specification to customize your prquantifier.yaml context profile.
• Change your engineering behaviors
  • For PRs that fall outside of the desired spectrum, review the details and check if:
    • Your PR could be split in smaller, self-contained PRs instead
    • Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR).

How to interpret the change counts in git diff output

• One line was added: +1 -0
• One line was deleted: +0 -1
• One line was modified: +1 -1 (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion)
• Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

---

Was this comment helpful? :thumbsup:  :ok_hand:  :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

[pull-request-quantifier-deprecated[bot]]

This PR has 100 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

---

Quantification details

Label      : Small
Size       : +55 -45
Percentile : 40%

Total files changed: 5

Change summary by file extension:
.md : +13 -0
.cs : +42 -45

Change counts above are quantified counts, based on the PullRequestQuantifier customizations.

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean:

• Fast and predictable releases to production:
  • Optimal size changes are more likely to be reviewed faster with fewer iterations.
  • Similarity in low PR complexity drives similar review times.
• Review quality is likely higher as complexity is lower:
  • Bugs are more likely to be detected.
  • Code inconsistencies are more likely to be detected.
• Knowledge sharing is improved within the participants:
  • Small portions can be assimilated better.
• Better engineering practices are exercised:
  • Solving big problems by dividing them in well contained, smaller problems.
  • Exercising separation of concerns within the code changes.

What can I do to optimize my changes

• Use the PullRequestQuantifier to quantify your PR accurately
  • Create a context profile for your repo using the context generator
  • Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the Excluded section from your prquantifier.yaml context profile.
  • Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your prquantifier.yaml context profile.
  • Only use the labels that matter to you, see context specification to customize your prquantifier.yaml context profile.
• Change your engineering behaviors
  • For PRs that fall outside of the desired spectrum, review the details and check if:
    • Your PR could be split in smaller, self-contained PRs instead
    • Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR).

How to interpret the change counts in git diff output

• One line was added: +1 -0
• One line was deleted: +0 -1
• One line was modified: +1 -1 (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion)
• Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

---

Was this comment helpful? :thumbsup:  :ok_hand:  :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

[pull-request-quantifier-deprecated[bot]]

This PR has 100 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

---

Quantification details

Label      : Small
Size       : +55 -45
Percentile : 40%

Total files changed: 5

Change summary by file extension:
.md : +13 -0
.cs : +42 -45

Change counts above are quantified counts, based on the PullRequestQuantifier customizations.

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean:

• Fast and predictable releases to production:
  • Optimal size changes are more likely to be reviewed faster with fewer iterations.
  • Similarity in low PR complexity drives similar review times.
• Review quality is likely higher as complexity is lower:
  • Bugs are more likely to be detected.
  • Code inconsistencies are more likely to be detected.
• Knowledge sharing is improved within the participants:
  • Small portions can be assimilated better.
• Better engineering practices are exercised:
  • Solving big problems by dividing them in well contained, smaller problems.
  • Exercising separation of concerns within the code changes.

What can I do to optimize my changes

• Use the PullRequestQuantifier to quantify your PR accurately
  • Create a context profile for your repo using the context generator
  • Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the Excluded section from your prquantifier.yaml context profile.
  • Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your prquantifier.yaml context profile.
  • Only use the labels that matter to you, see context specification to customize your prquantifier.yaml context profile.
• Change your engineering behaviors
  • For PRs that fall outside of the desired spectrum, review the details and check if:
    • Your PR could be split in smaller, self-contained PRs instead
    • Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR).

How to interpret the change counts in git diff output

• One line was added: +1 -0
• One line was deleted: +0 -1
• One line was modified: +1 -1 (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion)
• Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

---

Was this comment helpful? :thumbsup:  :ok_hand:  :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.