pethublocal

pethublocal copied to clipboard

First of all thanks for the effort for creating this application. I have used PI-Hole for redirecting the DNS During the setup I'm getting stuck with the following errors: `/code/run...

Imperial-Guard

After some long night of fiddling with this, I've managed to start the docker containers. I added the dns and forwarded to the server via an a-record. I'm getting this...

DieterKoblenz

So I figured I'd try out this project again. I'm getting the following error when attempting to create a database. Clearly it says its an authentication error, but I have...

flyize

Custom Mode: "Forced Lid Closed Custom Mode"

1

I sadly cant say which Bit it is, but i have seen your CustomModes and seen that this one is missing. Support has set this on my feeders :) But...

XRyu

Add Github Actions docker builds

2

Hey, I've added this github action to automatically build the docker images and add them to the github package repository, so people can just pull from there rather than having...

brettjenkins

Question - around serial port output

23

Does the serial port output anything useful (i.e. can you determine cat going in and out) in normal operations? I am thinking a possible solution to avoid MITM and hang...

chrish987

I am trying to figure out how the HDX Tags are calculated on the Pet Door, have some example tags with their HDX values on the left, and the hex...

plambrechtsen

The RSSI values are reported every hour by the hub, not sure how they are calculated: Device 1 = 55, Device 2 = 71, then 6 for 6 bytes, and...

plambrechtsen

Calculating values for CRC and missing xor key values

2

Currently with the decoded payload there is a check digit I don't know how it is calculated. Also I am not sure what byte 3 and 5 are of the...

plambrechtsen

Unable to download credentials

1

Hello! I was following your guide to download the AWS MQTT certificate with no luck. If I execute the following request (got with Insomnia, but curl returns the same): ```...

ShogunPanda