ds1054z

ds1054z copied to clipboard

Would be cool if networked scopes could be autodetected.

chmorgan

Discovery depends on the zeroconf Python package which is missing. After running pip install zeroconf i then get the following message. FutureWarning: has no update_service method. Provide one (it can...

adalsantana

First off all great job in developing the API for this scope. I'm very happy to be able to automate my measurements now using it. One feature however is missing...

habkorn

The DS1054z will not be discovered via zeroconf. Adding the proper ip address solve the issue. I'm using this model acc. info from ds1054z info Vendor: RIGOL TECHNOLOGIES Product: DS1054Z...

AN-sabik

save-screen: "IOError: image file is truncated"

7

When I do `save-screen` and there's a whole lot of stuff on the oscilloscope screen (i.e. high frequency oscillations), it dies with IOError. This seems to happen repeatably for dense...

shirriff

Update README.md

3

add note about Programming Guide

nopeppermint

B-G-T

can't save screen: PIL.UnidentifiedImageError: cannot identify image file <_io.BytesIO object at 0x04031C58>

1

 whenever i try to save a screenshot it raise pillow unidentify io_byte(as show in the picture) I already try to reinstall pillow and set DISPLAY_DATA_BYTES to 1152000 but still...

isarafx

Identify the MSO series of this scope

2

Tested on the MSO1104z. I've been using this change for a couple of months, and I see no problem with it. However, I do not have the DS1054z to be...

naniBox

Changed expected data size from display to equal to display size (800x480x24 bit), fixed issue #10 for me.

QrackEE