Paweł Jałocha

Did you use the T-Beam_v10.cfg thus like this: cp T-Beam_v10.cfg main/config.h make make flash

I can only suspect the Meshtastic would set the GPS is some special mode and make it remember this setting ? Does the GPS starting flashing the PPS after some...

Maybe it is worth to ask there, open an issue like here, if they are aware of doing some permanent changes to the GPS. If they can explain this, then...

OK, thank you, I will add a protection against cuch situation in the software.

It is most likely that the device is not moving. When moving more than 1m/s the OGNTP packet should be sent at 1Hz rate and the PilotAware packet at about...

Please send me the Stratux .ogn log files from your car test via the private channel. I can then see how often the P3I position was transmitted.

OK, I believe you, I swapped the two calls, although I did not notice a problem, I could still connect to WiFi. BTW: I added WITH_AP_BUTTON which makes the AP...

You can control it already: if you set APname to empty, then WiFi AP would not start. I actually am not sure now, because any unexpected restart would turn the...

For the indication, I will make one, as there is already a WiFi icon there, just not properly controlled yet.

I think this is fine, post a picture of such page. Ideally there could be many pages which are being enabled/disabled by for example longer or double press on the...