Pipiche

Getting similar issues on a BASE mode with Firmware version8. Going back to version 6 which was more stable from that side PS/Le fonctionnement etait parfaite depuis plusieurs semaines avec...

I having this issue, just when you are starting to load the network, or you have interferences. In that case you get duplicate. I would have expect this is done...

@MrYutz did you succeed in making your network stable ? We are also struggling in a large setup (more than 60 devices, with a lot of metering, which means a...

I'll re-enabled debug information to capture those mettrics. But here is what I found on past logs ``` PluginZigbee_04.log.2022-07-23:2022-07-23 13:21:54,633 DEBUG :ezsp_counters: [MAC_RX_BROADCAST = 1697, MAC_TX_BROADCAST = 231, MAC_RX_UNICAST =...

Is there a way to get some documentations on all those counters ? For instance , PHY_CCA_FAIL_COUNT what should be a reasonable value ? In your example I see PHY_CCA_FAIL_COUNT...

here after is an exemple of crash. Should I do to fix "ERROR_EXCEEDED_MAXIMUM_ACK_TIMEOUT_COUNT" ? And then it looks like everything is stuck, no more logs until we restart ``` 2022-07-25...

just to keep it open (before a bot close it)

https://github.com/zigpy/bellows/pull/480

Is there anything expected to be done when receiving Exception ? bellows.exception.ControllerError: ApplicationController is not running

There is no more Log. the bellows just stop working and logging ! A restart of the plugin was tried and this doesn't help A full power Off/On make it...