homeduino icon indicating copy to clipboard operation
homeduino copied to clipboard

Published 20 hours ago • verified publisher icon pimatic

No response on PING

Open Steffeng5 opened this issue 7 years ago • 1 comments

Hi, i connected a arduino nano to a raspberry pi, uploaded the sketch via make upload

pi@raspberrypi:~/homeduino $ make upload

Arduino.mk Configuration:

  • [AUTODETECTED] CURRENT_OS = LINUX
  • [USER] ARDMK_DIR = /home/pi/homeduino/arduino-mk
  • [AUTODETECTED] ARDUINO_DIR = /usr/share/arduino
  • [AUTODETECTED] ARDUINO_VERSION = 105
  • [DEFAULT] ARCHITECTURE =
  • [DEFAULT] VENDOR = arduino
  • [DEFAULT] ARDUINO_SKETCHBOOK = /home/pi/sketchbook
  • [BUNDLED] AVR_TOOLS_DIR = /usr/share/arduino/hardware/tools/avr (in Arduino distribution)
  • [COMPUTED] ARDUINO_LIB_PATH = /usr/share/arduino/libraries (from ARDUINO_DIR)
  • [DEFAULT] ARDUINO_CORE_PATH = /usr/share/arduino/hardware/arduino//cores/arduino
  • [COMPUTED] ARDUINO_VAR_PATH = /usr/share/arduino/hardware/arduino//variants (from ARDUINO_DIR)
  • [COMPUTED] BOARDS_TXT = /usr/share/arduino/hardware/arduino//boards.txt (from ARDUINO_DIR)
  • [USER] USER_LIB_PATH = /home/pi/homeduino/libraries
  • [DEFAULT] PRE_BUILD_HOOK = pre-build-hook.sh
  • [USER] BOARD_TAG = nano328
  • [COMPUTED] OBJDIR = build-nano328 (from BOARD_TAG)
  • [DETECTED] MONITOR_BAUDRATE = 115200 (in sketch)
  • [DEFAULT] OPTIMIZATION_LEVEL = s
  • [DEFAULT] MCU_FLAG_NAME = mmcu
  • [DEFAULT] CFLAGS_STD =
  • [DEFAULT] CXXFLAGS_STD =
  • [COMPUTED] DEVICE_PATH = /dev/ttyUSB0 (from MONITOR_PORT)
  • [AUTODETECTED] Size utility: AVR-aware for enhanced output
  •                  ARDUINO_LIBS =
  • [USER] SerialCommand
  • [USER] RFControl
  • [USER] Keypad
  • [USER] DHTlib
  • [USER] Keypad/utility
  • [COMPUTED] BOOTLOADER_PARENT = /usr/share/arduino/hardware/arduino//bootloaders (from ARDUINO_DIR)
  • [COMPUTED] ARDMK_VERSION = 1.3.4
  • [COMPUTED] CC_VERSION = 4.9.2 (avr-gcc)

mkdir -p build-nano328 make reset make[1]: Entering directory '/home/pi/homeduino' /home/pi/homeduino/arduino-mk/bin/ard-reset-arduino /dev/ttyUSB0 make[1]: Leaving directory '/home/pi/homeduino' make do_upload make[1]: Entering directory '/home/pi/homeduino' /usr/share/arduino/hardware/tools/avr/../avrdude -q -V -D -p atmega328p -C /usr/share/arduino/hardware/tools/avr/../avrdude.conf -c arduino -b 57600 -P /dev/ttyUSB0
-U flash:w:build-nano328/homeduino.hex:i

avrdude: AVR device initialized and ready to accept instructions avrdude: Device signature = 0x1e950f (probably m328p) avrdude: reading input file "build-nano328/homeduino.hex" avrdude: writing flash (11942 bytes): avrdude: 11942 bytes of flash written

avrdude: safemode: Fuses OK (E:00, H:00, L:00)

avrdude done. Thank you.

make[1]: Leaving directory '/home/pi/homeduino'

And with make monitor I get the "ready" output but if I type "PING hello" and press CTRL-Return I get no other output.

I'm on a mac with terminal connected via ssh on the raspberry. Maybe some keyboard encoding stuff? Any Ideas?

Steffeng5 avatar Dec 05 '17 17:12 Steffeng5

I have the same issue with a Chinese clone of Nano V3 with CH340. Maybe a SerialCommand problem?

pstradowski avatar Mar 02 '18 12:03 pstradowski