Getting /EMWIN but not /text

[rpdale]

EMWIN is just a subset of NWS products, and I was under the impression that the whole suite of files was available. While I'm seeing G16 and EMWIN directories (after adding the EMWIN configuration to the .conf file) but /text remains empty. I see the NWS text settings in the file. Is there something else I need to do?

[unixpunk]

I also noticed I only ever received the text product one time in a week or so timeframe. I think the only thing in there was a single file with these contents:

The HRIT/EMWIN broadcast utilizes virtual channels for the transmission of several simultaneous data streams. The table below identifies the current virtual channels assignments. The EMWIN and DCS virtual channels are permanent assignments; the remaining channel assignment may be modified in the future.

HRIT/EMWIN

Virtual Channel ID Group Product Name

---

    0             Imagery    Admin Text Messages
    1             Imagery    Mesoscale (ch. 2, 7, 13)
    2             Imagery    Band 2 - Red
    6             Imagery    GOES-15
    7             Imagery    Band 7 - Shortwave Window
    8             Imagery    Band 8
    9             Imagery    Band 9 - Mid-Level Trop
   13             Imagery    Band 13
   14             Imagery    Band 14 - IR
   15             Imagery    Band 15
   20             EMWIN      Priority
   21             EMWIN      Graphics
   22             EMWIN      Other
   23             Imagery    NWS Products
   24             Imagery    NHC Graphics Products
   25             Imagery    GOES-R JPG Products
   26             Imagery    International Graphics Products
   30             DCS        DCS Admin
   31             DCS        DCS Data
   60             Imagery    Himawari

For additional information or questions please visit http://www.noaasis.noaa.gov/ or contact the HRIT/EMWIN Broadcast Manager at [email protected] (301-817- 4558).

[rpdale]

Thanks for the note! After digging through some old documents I realized AWIPS wasn’t part of the feed – but the AWIPS info in the decoder template threw me 😊 Here’s the current list for GOES16 channels.

• Rob

From: unixpunk [email protected] Sent: Sunday, November 8, 2020 3:09 PM To: pietern/goestools [email protected] Cc: rpdale [email protected]; Author [email protected] Subject: Re: [pietern/goestools] Getting /EMWIN but not /text (#99)

I also noticed I only ever received the text product one time in a week or so timeframe. I think the only think in there was a single file with these contents:

`The HRIT/EMWIN broadcast utilizes virtual channels for the transmission of several simultaneous data streams. The table below identifies the current virtual channels assignments. The EMWIN and DCS virtual channels are permanent assignments; the remaining channel assignment may be modified in the future.

HRIT/EMWIN

Virtual Channel ID Group Product Name

0             Imagery    Admin Text Messages

1             Imagery    Mesoscale (ch. 2, 7, 13)

2             Imagery    Band 2 - Red

6             Imagery    GOES-15

7             Imagery    Band 7 - Shortwave Window

8             Imagery    Band 8

9             Imagery    Band 9 - Mid-Level Trop

13 Imagery Band 13

14 Imagery Band 14 - IR

15 Imagery Band 15

20 EMWIN Priority

21 EMWIN Graphics

22 EMWIN Other

23 Imagery NWS Products

24 Imagery NHC Graphics Products

25 Imagery GOES-R JPG Products

26 Imagery International Graphics Products

30 DCS DCS Admin

31 DCS DCS Data

60 Imagery Himawari

For additional information or questions please visit http://www.noaasis.noaa.gov/ or contact the HRIT/EMWIN Broadcast Manager at [email protected] (301-817- 4558).`

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/pietern/goestools/issues/99#issuecomment-723659177, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACYHNFUBHMYWBON4BHAUO2LSO33HTANCNFSM4TNXLVLQ .