Filip Gołaś
Filip Gołaś
Changes to fix the issue were implemented: https://github.com/Dasharo/edk2/pull/245 https://github.com/Dasharo/coreboot/pull/674 First boot takes up to 8-9 seconds now, with the consecutive reboots being quicker.
the `proc_thermal_pci 0000:00:04.0: error: proc_thermal_add, will continue` error appears on QubesOS R4.2.4 on V560TU w/ v1.0.0-rc6, but that error seems to be expected now https://github.com/dasharo/open-source-firmware-validation/commit/98e915b33d8a2a7d676f7d91acb8c524a4917f8c [qb-dmesg.log](https://github.com/user-attachments/files/22169459/qb-dmesg.log)
It did happen on 6.8 kernel so that's probably the reason for this. I will again switch to 6.9 kernel to see if that's the case.
I haven't noticed any issues with waking up from suspend on kernel 6.9 so that may be the reason for this. But using kernel 6.9 causes the secure boot to...
> The 200mhz freq is probably the actual minimum on these processors. You can check by connecting and disconnecting a power supply and watching the frequencies. The CPU will throttle...
On kernel 6.8.0-44 `sudo turbostat -s Bzy_MHz -i 0.1` shows that most of the cores drop to exactly 200MHz the moment I unplug the AC. Some cores fall even a...
[cpu-frequency.robot_log.zip](https://github.com/user-attachments/files/17070248/cpu-frequency.robot_log.zip) On battery on Ubuntu with kernel 6.9 the frequencies haven't fell below 400MHz. The log shows it's a test without load because the load was launched manually. `stress-ng --cpu...
No HDMI output in FW on V540TND with Dasharo v0.9.1-rc5. Tried two monitors and two cables. Also tried closing/opening the lid.
https://github.com/Dasharo/docs/pull/903
On NV41PZ Alderlake with Dasharo v1.8.0-rc3 neither closing the lid nor pressing Fn+F12 suspends the device. All closing the lid does is turn off the backlight, but the image is...