micronova_controller

micronova_controller copied to clipboard

unable to read values from the stove

3

Hello @philibertc , a short while ago I received your pcb. Installing the Wemos and the firmware was no problem, so far so good. Only I have a problem getting...

hansf71

Safer way to turn the stove off

1

Turning the stove on works fine over writing `0x01` to `RAM 0x21`, turning it off (sending `0x06` to `RAM 0x21`) seems to be problematic. My stove enters "turning off mode"...

eni23

Only on status works

6

Hello everyone, I managed to configure everything but unfortunately the only working command is the ignition. The shutdown does not work and I do not receive data on temperatures, flames,...

DEDEit

Hi, i have a Jolly Mec Foghet Hydro, i would like to integrate in Home Assistant. I have done this pictures of board and remote controller, but there aren t...

lucasimons

Buy pcb kit

1

when you can buy the kitpcb?

manustars

Nordica Extraflame Theodora works only "ON" command

11

Hey all I own a 2013 Nordica Extraflame Teodora stove (basically this one: https://www.lanordica-extraflame.com/en/products/pellet-stoves/teodora-evo). I've just downloaded this wonderful code on a D1 mini and realized the connection with the...

percevalknight

I have not good wifi in house. And sometimes esp is looping I see in serial console: Attempting MQTT connection...failed, rc=-2 try again in 5 seconds user pass Attempting MQTT...

sanya238

Wiring for La Nordica Extraflame Emma Plus

11

Hi, First of all, thanks for putting this project together! I'm trying to use this project to control/monitor the aforementioned pellet stove, but am struggling to find the right connections....

vyruz1986

[Feature request] How to make it work with Alexa

8

Hello philibert. All works so fine with my Extraflame Luisella. Thanks to you. But how I could make it works with Alexa. I try with fauxmo code but I’m a...

jayjay13011

Jolly Mec synthesis modular 80 + micronova wifi module

1

Hi there ! First of all, thank you for the work you provided on this integration ! I recently bought a jolly mec stove, and cannot say I'm convinced by...

silkyclouds