Bug Tapo H100 Smart Hub > 12 Devices

[michaelkun]

Last version of integracion

Device:

H100 por TP-Link Firmware: 1.3.9 Build 230522 Rel.103415 Hardware: 1.0

HS Versions:

Core 2023.12.1 Supervisor 2023.11.6 Operating System11.2

The problem began to happen the moment I exceeded 12 devices paired with the tapo hub, from that moment every time I reload the integration devices randomly appear and disappear, always missing some, especially motion sensors or door sensors

log:

home-assistant_tapo_2023-12-13T18-53-04.108Z.log

Currently the sensor of a window is the one that does not appear, I understand that it is the binary_sensor error

My theory is that when all the devices that depend on the coordinator are listed, exceeding a certain amount will cause the hub to time out and stop responding as expected. If this is the case, perhaps making a slower acquisition of the subdevices may work.

[alexskynet]

Similar problem here: in my case the HUB stops responding on the lan but is accessible from the Tapo App

[michaelkun]

@alexskynet Of course, from the tapo app everything works and appears correctly, it seems to be a rejection towards the integration

[github-actions[bot]]

This issue is stale because it has been open for 30 days with no activity.

[Saftlad]

Issue is still ongoing. I have now reverted to purchasing additional hubs to work around this limitation but it would be good if it could be resolved