Peter Buchegger

@fkaup thanks for the new board :)

If there is a config issue, please re-download the config and update it again. you can also post your config here that we chan check it.

SX1268 is still not supported, but I have a board at home to test this out. please stay tune until I have the correct changes.

will update the code soon to another library which will support the SX1268.

@ivankravets suggesting a self hosted runner is a bad idea. if somebody is hijecking the runner with a simple push-request the runner and the internal network is open for for...

the board is still not completely supported by my firmware. It is already in preparation 😉

looks like something is taking to long and the wathdog is restarting the esp. can you post your exact configuration? please remove your personal data (callsign, wifi settings, aprs-is passcode)

issue was reproduced, fix is in: https://github.com/lora-aprs/LoRa_APRS_iGate/pull/303

@ohanssen @pinkolin @Mane76 please report back if TX is now working for you! will create based on the feedback a new release. Thank you very much!

@Mane76 I just tried to reproduce your issue, but couldn't. can you please retry again (delete flash first, than upload config and than firmware upload with monitoring)? thanks!