Rafael Silva

Started to look at this again, unfortunately, the USB cores are very similar, but just different enough to make it quite hard to make compatible, so I just forked the...

cmsis PR: hathach/microchip_driver#9 Board driver is a todo

I understand, i the meantime I'll try to assemble some boards with it @HiFiPhile you think you could take a look? I am certain there are things that beed to...

finally tried running this when I connected in high speed I got constant bus resets to high speed ``` USBD init on controller 0 sizeof(usbd_device_t) = 47 CDC init MSC...

after usb high speed reset it doesnt seem to get any endpoint interrupts, while it does on full anyone think tthey can help me diagnose this?

The host seems to be requesting more data than expected for config descriptos, 0x8d/141 vs 77 for dual cdc, curiously on hid_composite it enumerated

Full speed HID composite ``` USBD init on controller 0 sizeof(usbd_device_t) = 47 HID init USBD Bus Reset : Full Speed USBD Setup Received 80 06 00 01 00 00...

@hathach / @HiFiPhile Do you have any tips on what to look for? on high speed it seems to get stuck on the event bus reset on the queue, like...

It's a board by me, i don't have access to any dev boards or premade hardware with one, but it should be good, in theory https://github.com/openinput-fw/russian-woodpecker

There's a PDF in the releases https://github.com/openinput-fw/russian-woodpecker/releases/tag/r0.1