homeassistant-rademacher
homeassistant-rademacher copied to clipboard
peribeir
This custom integration provides access to Rademacher Devices connected to a HomePilot (or Start2Smart) bridge.
Hello there, This is basically a re-opening of issue #21 that had been closed without action as the integration of motion sensors were no longer needed at that time. The...
Hi, running the newest HA version and the newest HACS version, but you integration unfortunately will not be found in HACS default repo, see attached screenshots. When trying to add...
Hi, I moved to HA two month ago and I really enjoy this Integration because I have a lot of Rademacher devices. It works really well. Big thank you for...
I use a Rademacher HomePilot Gateway to control electric shutter motors around the house. For a long time, I used a really old version of this Plugin which worked fine....
I own 6 "Rademacher RolloTron Schwenkwickler Standard DuoFern Minigurt 2550-UW" and I'm happy to see them integrated into Home Assistant with this custom component. Great work! The one thing I...
Jul 20 23:22:17 homeassistant hass[1030]: 2023-07-20 23:22:17.016 ERROR (MainThread) [homeassistant.loader] Unexpected exception importing platform custom_components.rademacher.config_flow Jul 20 23:22:17 homeassistant hass[1030]: Traceback (most recent call last): Jul 20 23:22:17 homeassistant hass[1030]:...
Hi there, I am trying to integrate a switch which makes it possible to change the automatic mode of actors (auto_mode_cfg from device) from the motion sensor. This is necessary...
Hey, do you plan to add support for the DuoFern Connect-Aktor? https://www.rademacher.de/shop/rollladen-sonnenschutz/steuerung/duofern-connect-aktor-9477
Hi Pedro, I've registered the manual transmitter (6 Keys) at my homepilot. I'll be glad, if you could integrate it, too. Here is the output of the webinterface. `{"error_description":"OK","error_code":0,"payload":{"device":{"capabilities":[{"name":"KEY_DOWN_EVT","value":"3","min_value":"1","max_value":"6","step_size":"1","read_only":true,"timestamp":1648799046},{"name":"KEY_INC_EVT","min_value":"1","max_value":"6","step_size":"1","read_only":true,"timestamp":-1},{"name":"BATT_LOW_EVT","value":"false","read_only":true,"timestamp":1648799070},{"name":"PAIRING_CONFIRMED_LOC","value":"true","read_only":false,"timestamp":-1},{"name":"ID_DEVICE_LOC","value":"1010030","read_only":false,"timestamp":-1},{"name":"PROTOCOL_ID_CFG","value":"a002aa","read_only":false,"timestamp":-1},{"name":"VERSION_CFG","value":"2.2-1","read_only":false,"timestamp":1648799070},{"name":"PROD_CODE_DEVICE_LOC","value":"32480366","read_only":false,"timestamp":-1},{"name":"REACHABILITY_EVT","value":"true","read_only":true,"timestamp":1648799070},{"name":"KEY_STOP_EVT","value":"1","min_value":"1","max_value":"6","step_size":"1","read_only":true,"timestamp":1648799070},{"name":"NAME_DEVICE_LOC","value":"DuoFern Handsender","read_only":false,"timestamp":1647787369},{"name":"PROT_ID_DEVICE_LOC","value":"a002aa_1","read_only":false,"timestamp":-1},{"name":"INTF_ID_DEVICE_LOC","value":"3","read_only":false,"timestamp":-1},{"name":"KEY_DEC_EVT","min_value":"1","max_value":"6","step_size":"1","read_only":true,"timestamp":-1},{"name":"KEY_UP_EVT","value":"3","min_value":"1","max_value":"6","step_size":"1","read_only":true,"timestamp":1648799054},{"name":"ICONSET_LOC","value":"iconset35","read_only":false,"timestamp":1647787354},{"name":"VIS_DEVICE_LOC","value":"true","read_only":false,"timestamp":-1},{"name":"DEVICE_TYPE_LOC","value":"10","read_only":false,"timestamp":-1},{"name":"ICONSET_INV_LOC","value":"false","read_only":false,"timestamp":-1},{"name":"DESCR_DEVICE_LOC","value":"Handsender","read_only":false,"timestamp":1647787543}],"scenes":[]}}}`...
an automation running correctly until JUN24 shows errors from V.2024.7.x: Error: required key not provided @ data['position']. Are there any suggestions to fix this? Thank you.
