DS-KB8112-IM support

[attilhacks]

Is there an existing feature request for this?

• [X] I have searched the existing issues

Add-on

Doorbell

Your feature request

Hello, I have 3 x DS-KB8112-IM doorbells and I would like to connect to your addon, unfortunately I get this message:

ERROR | main::101 - Error while listening to events in Citofono Sbarra: Not enough resource on the device. Error code:28

this is the complete log

<encoderVersion>V1.0</encoderVersion> <encoderReleasedDate>build 180516</encoderReleasedDate> <deviceType>EmbeddedNetVIS</deviceType> <telecontrolID>99</telecontrolID> </DeviceInfo>

2024-04-23 20:44:17.811 | DEBUG | doorbell:sdk_device_ability:275 - Response url for sdk_device_ability: <IpViewDevAbility version="2.0"> <LocalAbility> <inputVolume min="0" max="10"/> <outputVolume min="0" max="10"/> </LocalAbility> <VideoIntercom> <DeviceID> true <supportUnitType opt="VillaOutDoorDevice,AgainDevice"/> <VillaOutDoorDevice> <buildingNum min="1" max="999"/> <unitNum min="1" max="99"/> <floorNum min="-10" max="10"/> <devIndex min="0" max="99"/> </VillaOutDoorDevice> <AgainDevice> </AgainDevice> </DeviceID> <OperationTime> <messageTime min="30" max="60"/> <talkTime min="90" max="120"/> </OperationTime> <RelateDevice> <sipServerIP opt="ipv4"/> <centerIP opt="ipv4"/> <centerPort min="0" max="65535"/> </RelateDevice> <ControlGateway> <gatewayIndex min="1"/> <controlSrc>true</controlSrc> <controlType opt="monitor,calling"/> <lockType opt="normal"/> </ControlGateway> <IOIn> <IOInNo attri="readonly" min="1" max="1"/> <useType opt="disabled,openDoorBtn,magneticStatus,custom"/> <NodeList> <Node> 1 AI <useType opt="disabled,openDoorBtn,magneticStatus,custom"/> </Node> </NodeList> </IOIn> <IOOut> <IOOutNo attri="readonly" min="1" max="1"/> <useType opt="disabled,electricLock,custom"/> <NodeList> <Node> 1 COM <useType opt="disabled,electricLock,custom"/> </Node> </NodeList> </IOOut> <supportVisRegisterInfo opt="true"/> <supportVideoFormat opt="P,N"/> <CallRoomConfig> <callManageCenter opt="true,false"/> </CallRoomConfig> </VideoIntercom> <UploadAlarmCfg> <UploadDoorNotCloseAlarm opt="true,false"/> </UploadAlarmCfg> <NoNeedReboot> <videoResolutionChange opt="true"/> <videoFrameRateChange opt="true"/> </NoNeedReboot> </IpViewDevAbility>

2024-04-23 20:44:17.813 | DEBUG | mqtt:init:166 - Configuring 1 door switches 2024-04-23 20:44:17.818 | DEBUG | event:register_handler:234 - Adding event handler MQTT 2024-04-23 20:44:17.819 | DEBUG | mqtt_input:init:21 - Setting up MQTTInput 2024-04-23 20:44:17.819 | DEBUG | sdk.utils:call_ISAPI:125 - Call ISAPI request method url body: GET /ISAPI/System/deviceInfo
2024-04-23 20:44:17.862 | DEBUG | sdk.utils:call_ISAPI:165 - Response output: <DeviceInfo version="2.0" xmlns="http://www.isapi.org/ver20/XMLSchema"> <deviceName>Citofono Cancelli</deviceName> <deviceID>48323133-3133-3235-3238-1868cbf9fc8d</deviceID> DS-KB8112-IM <serialNumber>DS-KB8112-IM0120180502WR213132528CL</serialNumber> <macAddress>18:68:cb:f9:fc:8d</macAddress> <firmwareVersion>V1.4.5</firmwareVersion> <firmwareReleasedDate>build 190219</firmwareReleasedDate> <encoderVersion>V1.0</encoderVersion> <encoderReleasedDate>build 180516</encoderReleasedDate> <deviceType>EmbeddedNetVIS</deviceType> <telecontrolID>99</telecontrolID> </DeviceInfo>

2024-04-23 20:44:17.912 | DEBUG | event:start:255 - Registering callback function using SDK 2024-04-23 20:44:17.916 | DEBUG | doorbell:setup_alarm:90 - Arming the device via SDK 2024-04-23 20:44:17.938 | ERROR | main::101 - Error while listening to events in Citofono Sbarra: Not enough resource on the device. Error code:28

thanks for your help

[attilhacks]

PS: resetting to factory default didn't solve the issue

[pergolafabio]

Do you see the error on all 3 devices? Have you tried maybe upgrading the firmware? The add-on the first time is downloading a huge backlog, maybe after a few reboots and or restarts , the error will be gone...

[pergolafabio]

Sew also this one, he was able to resolve with a reset...

https://github.com/pergolafabio/Hikvision-Addons/issues/178

I think it's firmware related maybe

[attilhacks]

Ciao Fabio, yes it's a common thing on all of the 3 devices, I tried resetting one but no luck. Firmware is the latest available for that model which is kind of old...

it works great on DS-KV6113-WPE1(C)

Many thanks

[pergolafabio]

Hmm , then I'm out of ideas :-( Maybe you can ask on the community forums to see if other People succeeded with this device?

[pergolafabio]

Did you manage to get it to work?

[attilhacks]

Hello, thanks for the follow up no, looks like an issue with the device and not with your code

[pergolafabio]

Ah ok, what was the issue? Maybe interesting for other people?

[attilhacks]

no idea, the device jus throws Error code:28 but wasn't able to find the problem :-(
I will get back to it when I have more time anyways.

thanks