Phil Elwell
Phil Elwell
10ms seems to be a magic packet interval - less than that and the link has the relative stability of the flood ping, sometimes not losing a single packet for...
Disabling power-down on the PHY (removing the `brcm,powerdown-enable` DT property) doesn't seem to make any difference.
After a long investigation, the team responsible for the RP1 chip have determined that there is a bug in the Ethernet MAC IP. We are currently trying to establish if...
Note that "Pi 5" includes all models of the Pi 5 family, including Pi 500 and Pi 500+. Compute Module 5 is similarly affected - although it uses the BCM54210PE...
Thank you for that piece of detective work. It gives us a potential route to reproducing the issue, and it gives others a workaround.
Yes, @P33M, but the problem here is that the trigger doesn't work unless exactly 50MHz is requested. It needs some form of inequality or other method of determining that the...
Your mileage may vary, but I don't think I've seen it work reliably above 100MHz (that's with a divisor of 4). The next possible clock is 133MHz (a divisor of...
https://github.com/raspberrypi/linux/pull/7135 is a pull request with a proposed fix for this issue. Once the auto-builds have completed in about 20 minutes you will be able to install a trial build...
This does not sound like a problem with the Linux kernel - you would be better off asking in the [Troubleshooting section of the Forums](https://forums.raspberrypi.com/viewforum.php?f=28). However, I think you need...
6.17 isn't even released yet. Does it work on 6.12 (which is our current kernel)?