Phil Elwell
Phil Elwell
And: ``` $ lsusb ```
That's a rev 1.1 4B with 4GB RAM running a recent kernel. The rev 1.1 boards where fitted with BCM2711B0 - the first production silicon - which had a few...
It's the penultimate 2 characters that matter: 2711ZPKFSB06**CO**T On a running system the easiest way to tell is to look at the declaration of the bus the SD card controller...
As far as I know, all production 8GB units are fitted with C0s.
It's a test - I'm trying to ascertain whether or not SWIOTLB is a factor or not. Yes it will limit the system to 3GB _during the test_.
> Since hardware-compatibility between 4B and 5 should be given I wouldn't say it so definitely - almost all the external peripheral interfaces are different, even though we've tried to...
Contact the manufacturer of the Manta M8.
We can at least say it's an incompatibility between the cable, the carrier, and the use case.
The output of `i2cdetect -l` would be useful.
What's the state of this PR? rpi-6.16.y is EOL, and rpi-6.17.y can't be far behind. rpi-6.18.y must still be quite close to upstream, and we'd want this on rpi-6.18.y before...