Phil Elwell
Phil Elwell
Current kernels should be better at getting out of RP1 I2C error states, but there isn't much that can be done if CLK is being held low by a device.
They're not "generic" displays, they are intentionally made to look like one of our displays - clones, as 6by9 said.
For "look like" read "behave like" - I wasn't claiming it was a fake.
Does the Icom705 GPS have it's own power supply? Have you tried putting the GPS behind a powered hub?
Oh that's good - only about 70,000 commits between the two....
Have you tried with `dtoverlay=dwc2,dr_mode=host` in config.txt? That will cause the Pi to use a slower but more battle-hardened USB driver.
It's most necessary on models without PCIe, i.e. Pis 1-3 and the Zeroes. Without the explicit dr_mode it should auto-detect when it is being used in gadget mode, but you...
Unlikely - there's little point; we won't be updating the dwc-otg driver.
Oh, you mean suggest changes to them... your question was ambiguous.
Try this: https://gist.github.com/mkb/40bf48bc401ffa0cc4d3