SI4735-Radio-ESP32-Touchscreen-Arduino

SI4735-Radio-ESP32-Touchscreen-Arduino copied to clipboard

2.8" TFT SPI 240*320

14

I have finished building your project and it works correctly, the problem I have is that the touch screen does not work, I use a Chinese display with reference KMRTM28028-SPI,...

Haranochi

Compilation error: 'But_Key_Width' was not declared in this scope

3

Hi, when i try to compile the code on arduino IDE i found this error and not compile! Any ideas? I try a older version and the last version of...

JKorvo

SI5351 not found

2

I have tryed SI4735_2.8_TFT_SI5351_V3.5 with crystal and it runs nice. Have then tried to use si5351 enabling it on: //#define IhaveCrystal #define IhaveSI5351 but its returning SI5351 not found and...

dpechman

Compilation error: 'class TFT_eSPI' has no member named 'setTouch'

8

Hello, i try to verify code form here https://github.com/pe0mgb/SI4735-Radio-ESP32-Touchscreen-Arduino doit devkit v1 with tft 240x320 2.8" SPI TFT LCD Touch Panel Serial Port Module With PBC ILI9341. i run version...

andreasmon

TFT rotate

10

I assembled the standard circuit, the same as the project (ILI9341 + ESP32WROOM32 + Si4735), however the display is not in the correct rotation, both vertically and horizontally it does...

FabioLucca01

GERBER PCB

2

Help! I need GERBER PCB files for Gerber project pe0mgb SI4735-Radio-ESP32-Touch Screen-Arduino. Where can I find them?

pashkaboss

Compile Error

2

Hello, I have an error while compiling version3.5 version 3.4 is working nice. There whas no adc.h file in the zip. so i found something online and use that. Thanks...

ESSCHENK1

...

1

.....

RX1900

Rotary Encoder Reversed in 3.5

2

I just purchased my ATS25 and it shipped with Firmware 3.3 after upgrading to 3.5 I noticed the tuning was backwards. To resolve this issue I changed line 946 from...

smannchen

BIN(hex) files for ESP32 and upload tool V3.0-V3.4

2

If somebody is able to compile an INO-file with its libraries the whole compiling-history is stored in a local temp-directory C:\Users\nn\AppData\Local\Temp\arduino_build_400xxx There appear also the bin files for ESP32 and...

hamroel