MFC-T910DW on FreeBSD 12.2-RELEASE

[geoffmx]

I have this printer connected over the network so the command below has no output.

lpinfo --include-schemes usb -l -v

None of the printers listed in cups with brlaser work with the MFC-T910DW.

[QORTEC]

@geoffmx you are correct, that command requires the printer to be connected via USB to get any useful information. If you could temporally connect your printer via usb and provide output of this command it would be much appreciated.

[geoffmx]

Thanks @QORTEC

Here's the output from "sudo lpinfo --include-schemes usb -l -v"

Device: uri = usb://Brother/MFC-T910DW?serial=[REDACTED] class = direct info = Brother MFC-T910DW make-and-model = Brother MFC-T910DW device-id = MFG:Brother;CMD:HBP,PJL,URF;MDL:MFC-T910DW;CLS:PRINTER;CID:Brother Generic Jpeg Type2;URF:SRGB24,W8,CP1,IS19-1,MT1-8-11,OB9,PQ4-5,RS200-300,OFU0,V1.4,DM3; location =

[zeroheure]

@geoffmx didn't reported that it works @QORTEC are you sure it works ?

[QORTEC]

@geoffmx if you can confirm your printer works with this driver it would be appreciated, thought since it's an inkjet I suspect it does not.

@zeroheure Thanks, don't know how I missed that I'll double check my pull request to see if I made the same error elsewhere. I'll try to update it 2-3 when I get time off.

[geoffmx]

@QORTEC, the MFC-T910DW, as you noted, is an inkjet printer and does not work with brlaser. I can confirm that this printer works on a FreeBSD 13.0-RELEASE via Generic IPP Everywhere.

[zeroheure]

@QORTEC my list on the wiki should be up to date for those working and not.

@geoffmx thank you very much for your confirm.