rt_soldering_pen
rt_soldering_pen copied to clipboard
RT soldering pen project firmware
RT soldering pen
Manual
This firmware is for my project RT soldering pen
You can buy HW at Tindie
Building and flashing
Requirements
-
arm-gcc
-
cmake
-
make
orninja
- STM flashing SW and HW (ST-Link/V2 or any ST dev-kit, like Discovery or Nucleo board)
Building is possible on Linux, Mac and also on Windows
Getting source
git clone --recursive https://github.com/pavelrevak/rt_soldering_pen.git
cd rt_soldering_pen
Building
mkdir _build
cd _build
cmake -D CMAKE_TOOLCHAIN_FILE=../cmake/arm-none-eabi.cmake -D CMAKE_BUILD_TYPE=Release ..
make
Flashing
Connect ST-Link or other SWD programmer:
HW v0.3
- G : GND
- C : SWCLK
- D : SWDIO
HW v1.0
- C : SWCLK
- G : GND
- D : SWDIO
If you have installed pystlink and is in search path just type:
make flash
If you have another flashing utility you can generate hex of binary file:
make srec
or building also support other targets hex
and bin
Final files are saved in _build
folder