RPI-APS-inverters

RPI-APS-inverters copied to clipboard

using mosquitto in home assistant

3

Hi, i'm using mqtt to create sensors in Home Assistant i have datas in mqtt like this : {"serial":"xxxxxxxx","acv":232.6,"freq":50.0,"temp":15.1,"pwr":[21.4,20.6],"en":[41.6,40.6],"totalpwr":42.0,"totalen":82.2} with differents lines and serial, because i've 3 inverters but how...

defaliz

About home page

2

Hi, It's the first time i see the red color around the frame on the home page... What does it means ? Regards 

defaliz

Update 3.10

1

Hello Patience Thé link for download ecu_swupdate-v3_10.tar is dead. Can you repear it ? Thanks. JM.

jmguilbert

no polling since 2 days

3

Hi, since 2 days there is no polling on my raspberry... version ECU 3.10 when i poll inverters one by one with the web interface it's OK, but when i...

defaliz

Resetting database do not reset all values

5

Hello patince4711. After a newly installation of V3.10, and of course a database reset, after few hours of collecting data during a poor weather conditions, I got remaining values not...

autourdupc

Send a Zigbee command 2710AABBCC fail in Raspberry Pi zero 2 (V3_10)

1

Hello Patience. Seem there is a regression in the zigbee command code... ``` running script sendZigbee.pl... argument is 2710AABBCC sudo /usr/lib/cgi-bin/ecu/testZigbee.cgi 2710AABBCC Content-type:text/html running testZigbee.cgi version 2024-jan-12 testZigbee running with...

autourdupc

No back button in the Memo page (V3.10)

1

Hello patience4711. Nice to contact you again for this fabulous project. Due to SD card corruption I loose all my job and datas (and no backup) ! Just start again...

autourdupc

New version 4.1 system information issues

20

Hello patience. Burned today a new SD-CARD (just out-of-the-box). I was able to set the Wifi according to my access point. Next boot is very very long compared to V3.x...

autourdupc

The kernel on the version 3_x is several years old, Sadly it is not possible to issue software updates that also upgrades the linux verson. So i rebuild the system...

patience4711