pascallanger
pascallanger
Now that I've removed the excessive polling that they are doing, I can see what 's happening. At power up, they scan the RF channels surely to find 2 unused...
For "Power and Bind", what are you actually doing on the TX and RX side? I'm asking since I don't see a difference between bind and no bind... Is there...
The TX and RX don't "talk" at least in normal mode, TX->RX only. Please do a dump of the TX in bind mode. I doubt that the RX being off/on/bind...
What do you mean by "different model"? Can you select a model number on the TX? If yes I would need a dump of each model numbre.
Ok different model does not mean that there is "model match", ie the model and the RX have to match
Hummm, the model which was loaded was not default right? By this I mean there are stuff like end points adjustments, trims and may be more?
Also in the "Gyro" dump I see 2 things moving, like 2 channels. Do you have a mixer or were you moving 2 knobs in the same dump?
It's not steering moving at the same time as gyro as I can differentiate the channels. It's something else that seems to follow the gyro value in some way. Could...
Let's test. Reset a model to its default values and redo a gyro dump. Please move it slowly from one end to the other (you have been a little quick...
Yes it might be possible to do since the hw is compatible with multi. You need to connect the logic analyzer on the spi bus of the cyrf6936