pagabee

Is there an other way to upload files through wifi besides Cura? As I see the wifi modul has web view interface. Is it supported? 

I tried out the new ESP3D 3.0 firmware on MKS WIFI. The file transfer via wifi to SD card or U drive does not work, and communication stops after that....

There is no problem with Cura + MKS Wifi Plugin, but I am not using Cura slicer.

Hello iNDeX999, I think ESP3D V3.0 has MKS WIFI support: https://github.com/makerbase-mks/MKS-Robin-Nano-V3.X/wiki/Use-MKS_Robin_WIFI-on-Robin-Nano#use-esp3d-firmware-on-mks-robin-wifi Configuration.h: #define COMMUNICATION_PROTOCOL MKS_SERIAL

The same as with PuTTY:  

Hello, I found that, the MKS version of Marlin has several bugs, therefore I'm using the original Marlin with a SD sharing ESP3D board. The SD sharing solution has two...

I modified the code: if (i > 8) { dosName[6] = '\0'; dosName[7] = '\0'; dosName[8] = '\0'; strcat_P(dosName, PSTR("~1.GCO")); return dosName[0] != '\0'; } It works, but i don't...

I copied directly files with long name to the SD card. The TS35 display shows maximum 12 characters after that comes the ~.    ...

Hello, I modified the code to this. Please search for the “~1.GCO” in the wifi_module.ccp file. There is link in the bug description. snow79 ***@***.***> (időpont: 2022. máj. 19., Cs,...

Hello, my goal was the dos 8.3 file name format because I use the ESP Wifi modul with the ESP3D 3.0 firmware and it support max 8 characters. snow79 ***@***.***>...