EasyPulse
EasyPulse copied to clipboard
p-chan5
A set of HQ presets for Easy Effects.
A set of High Quality presets for Easy Effects.
WHAT'S INSIDE 🎁
7 configuration profiles:
- classical 🎻️
- edm 🎹
- hifi 💥️
- indie 🍄
- kpop 🎤️
- lofi 🍃️
- rock 🎸️
Do they sound amazing? Then support us with a ⭐️ and a follow!
INSTALLATION 🚀️
- Download the latest release as
zip / tar.gzor read HOW TO BUILD THEM. - Unzip and move the
.jsonfiles to one of the following paths:
- Flatpak:
~/.var/app/com.github.wwmm.easyeffects/config/easyeffects/output - Repositories:
~/.config/easyeffects/output
- Ready! Load them from
Presets>Output
EFFECTS 🎛️
CROSSFEED 🎧
Centers the signal via Feed | Cutoff sets the limit of frequencies it affects.
LOUDNESS 📢️
Applies volume corrections giving more prominence to the bass. Use it with Autogain
1ST EQUALIZER | MULTIBAND COMPRESSOR 🎲
They attenuate the input signal, giving space to the mix.
BASS ENHANCER 💪
It makes it sound crunchier.
FILTER 🚿️
Applies a High-Pass filter that eliminates bass. Switch to Low-Pass to do the opposite.
2ND / 3RD / 4TH EQUALIZER 🧬
They expand the signal recreating a simple / smooth / harsh Dolby Atmos
2ND MULTIBAND COMPRESSOR ❤️🔥
Increases the dynamic range of bass, midrange and treble.
COMPRESSOR 🔥️
Increases the dynamic range of the signal making it sound fuller.
REVERBERATION ⛰️
Creates a bedroom. Try going beyond these values, you can achieve creative results with some practice.
DELAY | STEREO TOOLS 👥️
They create a stereo separation effect.
AUTOGAIN 🛠
Normalizes the volume based on a Target | Reset History re-evaluates this operation (refresh) | Maximum History is arbitrary.
LIMITER | MAXIMIZER 👂️
They prevent the signal from exceeding 0 dB and becoming distorted | Threshold can replace Autogain in exchange for messing up dynamics.
LEVEL METER 🔊️
Helps to find the true perceived loudness of the signal.
TIPS ✨
HIGHER QUALITY, HIGHER LATENCY 💎️
You can get more quality in exchange for notable latency. Just follow the steps below:
- Select Loudness. Set the following values:
FFT Size :---: 16384
- Select 1st / 2nd / 3rd / 4th Equalizer. Set the following values:
| X | Mode |
|---|---|
| Equalizer | SPM |
| Filter | (MT) |
- Select Filter. Set the following values:
| Mode | Equalizer Mode |
|---|---|
| LRX (MT) | SPM |
- Select 1st / 2nd Multiband Compressor. Set the following values:
Operating Mode :---: Linear Phase
Band Sidechain Options
| # | Lookahead |
|---|---|
| X | 20.00 ms |
- Select Compressor. Set the following values:
Sidechain
Lookahead :---: 20.00 ms
- Select Limiter. Set the following values:
| Mode | Lookahead | Attack | Release |
|---|---|---|---|
| Herm Wide | 20.00 ms | 20.00 ms | 20.00 ms |
ON OR OFF 🤔
Some effects are disabled by default, be sure to turn them on and try them out. If you liked it, save it by rewriting the original file.
DOWNWARD / UPWARD COMPRESSION 📈
To achieve different styles, you can set the Release Time to 0.00, 100.00, 200.00, 300.00, 400.00 or 500.00 ms, the Ratio to 1.20:1, 1.50:1, 2.00:1, 3.00:1 or 6.00:1 and the Reactivity to 10.00 or 250.00 ms
COMPATIBILITY ISSUES ⚠️
Since we DO NOT support old versions, it is vital that you have the current stable branch for them to work.
p-chan5