gps-sdr-sim

gps-sdr-sim copied to clipboard

Rapberry pi 3 .bin Corruption.

2

Rapberry pi 3 B OS Jessie 3A PSU MicroSD is a Samsung evo 32GB U1 Kernel: 4.9.35-v7+ #1014 SMP Fri Jun 30 14:47:43 BST 2017 armv7l GNU/Linux When Generating a...

ghost

Added troubleshooting information for HackRF. This saves a lot of time.

JsBergbau

Hi, I'm using ubuntu on raspberry pi. I notice someone posted the same question some time ago but there's still no answer. If I increase beyond 34000 seconds, I will...

kwngeaw

Is there any way to create a motion scenario with some blind points? I mean, a route with no GPS signal in some of its points.

ferorted

Why do you calculate the initial carrier phase this way?

1

In the function of allocateChannel, there is a initial carrier phase needs to be calculated. // Initialize pseudorange computeRange(&rho, eph[sv], &ionoutc, grx, xyz); chan[i].rho0 = rho; // Initialize carrier phase...

Zissi-Lei

USRP B210 phone cant receive

6

Hi. I have used usrp b210 with -s 2500000 -b 16 -x 0. As there were no problems. USRP was transmitting the signal, I have checked with a spectrum analyzer....

EzioAuditore09

gps sdr

2

Hello, sir thanks for your valuable work on the gps sdr sim project. I am trying to simulate the project and everything is fine so far but when the position...

EzanaA

Hello, I'm wondering if the RINEX version 3.04 that was released in 2018 is supported?

bt-juanfandino1234

cannot process data

1

I am trying to generating the signal by inputting the data as shown. no sign of process signal is shown. also no gpssim.bin is generated. is there anyone know what...

Kosaki0615

No fix outside but fix inside

1

Hello, I have a bladerf x40 and I am using the GPS SDR sim to transmit GPS Spoofing. Inside my house and without GPS real signal the simulator works fine...

whiteman04