Windell Oskay
Windell Oskay
If an EBB is in bootloader mode, it will not currently be detected and updated by the updater program. It would be ideal to catch and handle this case.
While resuming after pausing, got an error indicating that a negative sleep time was requested.
Via @EmbeddedMan in https://code.google.com/p/eggbotcode/issues/detail?id=57 "Add new SC commands to allow setting up of two inputs per axis that when tripped will cause the motor not to step any more in...
We have been discussing the benefits of the XM vs SM command, here: https://github.com/evil-mad/EggBot/issues/63#issuecomment-264529402 Let's talk: Does it make sense for the future to changing how the inputs are checked?...
Via @EmbeddedMan in https://code.google.com/p/eggbotcode/issues/detail?id=43 Add command to EBB firmware to make it 'go forever at a constant speed' where the speed can be specified.
Following up on https://github.com/techninja/cncserver/issues/81, it would be good to add some features to the EBB firmware that can automatically detect and respond to limit switches being tripped. (It is already...
Copied from issue by @EmbeddedMan (Brian Schmalz) at Google Code: https://code.google.com/p/eggbotcode/issues/detail?id=22 "The latest hardware versions of the EBB (1.5 and 2.0) with the latest firmware (2.0.1) have the ability to...
Possible model: An option checkbox in AxiDraw Control allows you to enable auto-fill. If selected, any object that has a fill will be filled by hatch fills, using some reasonable...
Not very useful in live-painting mode, but potentially useful in simulation mode.