pygattlib
pygattlib copied to clipboard
oscaracena
The provided example in the docs does not work. It shows the following error message: `Traceback (most recent call last): File "/home/user/Documents/Python/ASHA/test.py", line 4, in devices = service.discover(timeout=5) ^^^^^^^^^^^^^^^^^^^^^^^^^^^ Boost.Python.ArgumentError:...
Since the Bluez update i can no longer connect from my laptop's bulit-in bluetooth to a BLE-controlled lamp (which uses a USR IOT WH-BLE 102 module). I have the following...
### What I'm trying to do? - I want to connect 25 ble sensors using 3 bluetooth adpeters(each supports about 11 ble devices) to a raspi. These BLE devices must...
**pip3 install gattlib** The following error repeats indefinitely. This comes after fixing a previous repeating error by manually installing glib-2.0 with sudo apt-get install libglib2.0-dev Seems that some dependencies are...
I have increased the MTU size. This allows me to receive more than 20 bytes of data. However, I still can't send more than 20 bytes. Output from python console:...
## System ### Software - **Operating System: Debian GNU/Linux 11 (bullseye)** - **Python Version: 3.9.2** - **gattlib Version: 0.20201113** ### Hardware ``` hci0: Type: Primary Bus: USB UP RUNNING RX...
Seems that gattlib has issues with python 3.10.0, they have forced a few things around C bindings. See error below, is easy fix? Thanks! ``` Successfully built gattlib Installing collected...
How should one implement notification receiving? I tried with the following:  I tried by sending the required data to the handle which is greater by the desired service's handle...
Hi. I have got a problem with reading characteristic using read_by_uuid function. This is full characteristic value:  Here is my code: >from gattlib import DiscoveryService >import sys >from gattlib...
Hello, recently I've tried to install gattlib via sudo -H python -m pip install gattlib, where python points to python2 ( 2.7 ) but it was unsuccessful and it threw...
