orsty3001

This is a constant problem for me as well. This is under rTorrent 0.9.6/0.13.6 on the latest Slackware with all updates installed. Caught internal_error: Block::clear() m_stalled != 0.28] [U 6/6]...

Since I posted I tried both the zero and the pi 1. I have also tried with just using the ground pin 9 and all of the grounds tied together....

I have dozens of USB ac adapters. Most are 1 amp and above. I tried them all and the USB ports on my computer. Just now I tried a jumpbox...

Is there a way to debug the software? I can't do anything to see where exactly it hangs because of the hard lockup that occurs.

I'll try to run that program when I get off work but just to let you know WsprryPi worked when I downloaded a version of Jessie that is from December...

sudo wspr -r -o -s My Callsign EM94ax 10 20m 0

I substituted "My Callsign" there so I wouldn't have to post my real callsign.

`Power: tx_pwr_dBm 10 Requested TX frequencies: 0.000010 MHz 14.097100 MHz 0.000000 MHz Extra options: NTP will be used to peridocially calibrate the transmission frequency Transmissions will continue forever until stopped...

I just noticed it did the same thing in my email. Very strange. I'm at a lost. I'm not sure how to diagnose this issue since it just hangs up...

Mine is also headless. I have it set to boot strait to the command line. It doesn't have snd-bcm2835 listed at all in /etc/modules. It still hangs up with the...