orangepi-build

orangepi-build copied to clipboard

orangepi 3b 构建 rootfs 在安装 zsh 包时会卡住，需要回车才能继续

4

如题，可能是后台在等待确认，建议显示全部输出，能更好的知道正在进行什么步骤，是等待操作还是构建卡住。

Alex6357

OrangePi 构建时下载完成资源后报错异常停止

4

最近（2024.3.19）才有的问题，构建选项 Full OS image for flashing Do not change the kernel configuration orangepizero3 next Others Ubuntu no yes 后面尝试只选择内核一样报错 ``` ⇒ ./build.sh [ warn ] This script requires root privileges,...

FlameKm

opi5 plus pulseaudio failed to start when lock autologin.

1

硬件：orangepi 5Plus 镜像：Orangepi5plus_1.0.8_ubuntu_focal_desktop_xfce_linux5.10.160.img 内核：Linux D152402102788IY 5.10.160-rockchip-rk3588 https://github.com/orangepi-xunlong/orangepi-build/pull/1.0.8 SMP Fri Nov 10 17:58:32 CST 2023 aarch64 aarch64 aarch64 GNU/Linux * 将镜像烧录到SD卡后 * 关闭autologin sudo disable_desktop_autologin.sh 再次重启输入密码。 声卡功能异常 

13037639065

OrangePI 3B Ethernet Stopped working

27

Hello, I'm reaching out to inform you that I've tested all versions, and unfortunately, after 20 days of utilizing this board, the Ethernet port has ceased to function. It is...

SuperKali

应该在第一次开机时执行ssh-keygen -A 不执行ssh-keygen会导致ssh server启动失败。 这样在hdmi没有联通的情况下，即使接了网线，也会无法远程ssh连接板子。 这会使得第一次开机变得非常麻烦。我的显示器就恰好无法被OrangePi 3B识别，并且我没准备USB-TTL线，这使得我没任何办法ssh修改显示器设置。

landall

官方build构建orangepi zero 3 wifi加载错误

2

dmesg： ``` 6.102421] WCN: combin_img 0 marlin_firmware_write finish and successful [ 6.102619] WCN: marlin_start_run read reset reg val:0x1 [ 6.102628] WCN: after do marlin_start_run reset reg val:0x0 [ 6.102816] WCN:...

lazybat

add ustc mirrors for china download mirror. 新增ustc 镜像，打包时可以安装dotnet runtime 8.0

kwanxian

构建时报错： ERROR in function install_deb_chroot

6

当前分支：next - 55155f1d 构建目标：orangepizero2w (1GB), server standard/minimal 构建环境：ubuntu 22.04.3 ``` [ error ] ERROR in function install_deb_chroot [ ./build.sh:305 -> scripts/main.sh:637 -> scripts/main.sh:606 -> scripts/debootstrap.sh:64 -> scripts/distributions.sh:388 -> scripts/image-helpers.sh:221 ->...

kwanxian

Hello team, Recently I bought an Orange Pi 5 Plus 8G board and learned Linux on this board. I only clone this repo and use the command `sudo ./build.sh` ->...

ngttai

I2C bus unit address format error, expected "10"

1

Hello. I get an error when building: ``` "arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts" [New DIRECTORY] 0,0-1 All CC [M] fs/xfs/xfs_qm.o CC [M] fs/xfs/xfs_quotaops.o CC [M] fs/xfs/xfs_rtalloc.o CC [M] fs/xfs/xfs_acl.o CC [M] fs/xfs/xfs_sysctl.o CC [M]...

vasilevrv