linux-orangepi

linux-orangepi copied to clipboard

Hello Newbie here. I acquired a OPI4 LTS, flashed with several distro (ubuntu, debian, armbian, etc) but none of them boot the hardware. It always boots to android. Any guess?

fabiorcosta

I am try to write some drivers in orangepi3_lts, I can control the led turn on or turn off. but i get a error when i try to use the...

dawendiguo

Orange Pi Zero 2 sunxi-hdmi soc:hdmi-audio@1: snd_soc_register_card failed

3

I was told this was the kernel being used for the Batocera 34 image running on the board. Here are two logs after trying to run two games: log1: [...

cf4769

Since the ehci0 & ohci0 are enabled, the default turned on usbotg doesn't work correctly.

dynm

Add dtoverlay support for 1-wire subsystem on H616 devices. Successfully tested on Orangepi Zero 2.

goodspeed34

Hi, I build e5d69c78425 from orange-pi-5.13-sunxi64 repo and see audio works - but has only left channel. Issue is seen in my media player app and also i.e. by issuing:...

warpme

树莓派3B 内核6.6版本 编译debian和ubuntu都无法启动

3

commit: ef82e033e45b07c9c2baff487b957d3995c8db33 所有参数都是用默认，编译出来的镜像烧录之后，黑屏，无法启动，SPI也清除了，依旧无法启动。绿灯不闪烁。 orangepi-build/external/config/boards/orangepi3b.conf 中添加BOOT_FDT_FILE="rockchip/rk3566-orangepi-3b.dtb" 编译的debian bookworm能启动，分配不了IP地址。 百度网盘下载的Ubuntu镜像是正常的，但kernel是5.10的。。。。。

tianfeng-yang

My development board is Orange Pi 5 Plus. I attempted to use the official system images: `Opios-arch-aarch64-gnome-opi5plus-24.04-linux5.10.160` and `Orangepi5plus_1.0.8_debian_bullseye_desktop_xfce_linux5.10.160`. On both of these operating systems, I cloned the source tree...

voidregreso

Joystick doesn't detected in /dev/input

3

I have to use the joystick for control of a robot, I expect to get /dev/input/js0 after connecting the Joystick, but js0 is appearing.  When I enter lsusb I...

sreesms

报错了 ac200 phy 需要先注释掉~~~

whaosoft