Shaper - Status -- some detalied information missing after 24.1.10

[ronin3510]

Important notices

Before you add a new report, we ask you kindly to acknowledge the following:

• [x] I have read the contributing guide lines at https://github.com/opnsense/core/blob/master/CONTRIBUTING.md
• [x] I am convinced that my issue is new after having checked both open and closed issues at https://github.com/opnsense/core/issues?q=is%3Aissue

Describe the bug

Hello again,

I have configured traffic shaping on my FWs a few years ago and other than a random BW change once in a blue moon. The configuration is quite simple but it has rules that include the VLAN CIDR information depending on traffic flow. This VLAN CIDR information in the rule meant the status page would neatly display the IP responsible for whatever traffic - and everything worked fine up until 24.1.10 which is the oldest ZFS snapshot I could go back to.

Things were already broken in 24.7.10 which was the next available snapshot and in the 25.1 -- with the assumption 25.4 might be affected too. Crucially though, the issue is fixed in OPNsense 25.7.a_569-amd64 which would mean a diff and backport of the dev changes to the stable branch(es) should be easy enough to do.

To Reproduce

It seems you guys are already on the right track. Please let me know if you need a sample of the TrafficShaper details in config.xml

Expected behavior

I'm attaching snapshots of the Shaper-Status pages in 24.1.10 and 25.1.8

Describe alternatives you considered

A clear and concise description of any alternative solutions or workaround you considered.

None, was afraid it might have been an intentional change but then I found the dev version and things became clear.

Software version used and hardware type if relevant, e.g.:

OPNsense 25.1.8 (amd64).