amlogic-s9xxx-armbian
amlogic-s9xxx-armbian copied to clipboard
ophub
E900v22e 内置网卡不工作，HDMI无显示
Device Information | 设备信息
- SOC: [e.g. S095L3]
- Model [E900v22e ]
Armbian Version | 系统版本 root@armbian:~# uname -a Linux armbian 5.15.156-ophub #1 SMP PREEMPT Thu Apr 25 11:22:44 EDT 2024 aarch64 aarch64 aarch64 GNU/Linux
Armbian_24.5.0_amlogic_s905l3b-e900v22e_jammy_5.15.156_server_2024.05.03.img
Describe the bug | 问题描述 E900v22e 内置网卡不工作(外接usb网卡获取的信息)，HDMI无显示 root@armbian:~# ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 3: ip6tnl0@NONE: <NOARP> mtu 1452 qdisc noop state DOWN group default qlen 1000 link/tunnel6 :: brd :: permaddr 5ac7:b7d0:64e:: 4: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000 link/ether e6:96:16:81:f9:7d brd ff:ff:ff:ff:ff:ff altname end0 5: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq state UP group default qlen 1000 link/ether 00:00:4e:12:30:4a brd ff:ff:ff:ff:ff:ff inet 192.168.1.6/24 brd 192.168.1.255 scope global dynamic noprefixroute eth1 valid_lft 85152sec preferred_lft 85152sec inet6 fe80::f351:e7ef:2a4b:3a9a/64 scope link noprefixroute valid_lft forever preferred_lft forever
Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Advertised pause frame use: Symmetric Receive-only Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Speed: Unknown! Duplex: Unknown! (255) Auto-negotiation: on Port: Twisted Pair PHYAD: 8 Transceiver: internal MDI-X: Unknown Supports Wake-on: ug Wake-on: d Current message level: 0x0000003f (63) drv probe link timer ifdown ifup Link detected: no
参考 https://github.com/ophub/amlogic-s9xxx-openwrt/issues/577 ，居然网卡可以了，只复制了uboot文件
我跟你一样的机顶盒，也想刷机。看你说刷机后无网卡驱动，是通过外置USB网卡连接上的。可是我虽然有个USB网卡，却没有Linux的驱动，进入死循环了。不进系统无法给网卡装驱动，但是没有网卡无法连接上盒子。有什么好的建议吗？
还没试过。但是看你说没有网卡驱动，我都连不上盒子了，怎么去设置USB网卡连接wifi呢？确实不懂，麻烦指点一下。
无线网卡不行，我用的有线usb网卡，你先试试拷贝u-boot文件，说不定驱动内置网卡了呢
/boot/u-boot*在这有了
我是小白用户。再问一下细节，是从/boot目录下将u-boot.emmc复制出来吗？目标目录是哪里呢？这个盒子本身是有有限和无线两个网卡，操作后是否两个网卡的驱动都有了？
复制相近的u-boot：
https://github.com/ophub/amlogic-s9xxx-armbian/blob/main/build-armbian/armbian-files/common-files/etc/model_database.conf
方法看文档：
https://github.com/ophub/amlogic-s9xxx-armbian/blob/main/documents/README.cn.md