plover
plover copied to clipboard
openstenoproject
Plover fails to see Wave machine
Summary
I recently purchased a Wave stenograph machine and have it hooked to my iMac with the included usb cable. Once I open Plover I get an error no matter what configuration I try, the fail is for serial port connection (errno 2). I've downloaded and installed Homebrew as well as libusb and restarted the computer but still can't see the machine in Plover. When I run a system report for OS X I can see the wave machine under the usb tab, so the computer knows it's there. What else can I do for this issue?
Reproducing
Stenograph Wave connected via USB cable
Plover Version
3.1.1
System
Mac OS X 10.12.3 I'll be updating to 10.13 tonight and trying again.
There are two communication modes for the Wave over USB:
- Standard This is the default. If you have installed the Stenograph USB plugin, then switching machine protocols to "Stenograph USB" should work with this mode. If the machine indicates "Connected" but the paper tape doesn't display your strokes, it is because the plugin doesn't support the Wave's particular protocol (this is something I've been struggling with for a while)
- Mira Emulation This mode creates a virtual serial port, which you should be able to connect to with the machine protocol set to "Stentura". The port to select should appear/disappear between scans if you plug and unplug your machine from your computer.
If you look at the Wave manual, page 59 details modifying the USB Communication Option.
Hope this helps!
It looks like the version of Plover he's using is the last official release ... so perhaps he might have better luck with the new weekly:
https://github.com/openstenoproject/plover/releases
@morinted First, thanks for the response. Second, when you say if I have the USB plugin, where can I get the USB plugin? Again I'm on a Mac so the drivers on stenograph.com don't work because they're Windows only.
@gdwaynewarner I've installed the newest version of Plover but I'm still having the same issue, I'm attaching a screenshot of the error I get.
On the new version of Plover, the "Plugins Manager" will let you download the Stenograph USB plugin. Then, restart Plover and it should be an option as a machine protocol.
Separately, when using Stentura with Mira Emulation, you should configure it through the Configuration >> Machine window in order to Scan and select Ports.
On Sun, Apr 29, 2018, 2:19 PM sunflowerpirate [email protected] wrote:
@gdwaynewarner https://github.com/gdwaynewarner I've installed the newest version of Plover but I'm still having the same issue, I'm attaching a screenshot of the error I get. [image: screen shot 2018-04-29 at 11 18 24 am] https://user-images.githubusercontent.com/38506597/39409619-1f39712a-4b9f-11e8-89d4-98c74174f05f.png
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/openstenoproject/plover/issues/944#issuecomment-385270644, or mute the thread https://github.com/notifications/unsubscribe-auth/AFkgSjM7McjZcB1hJZt-Fsg6nHuZjA-Fks5ttgQbgaJpZM4TrEoH .
Hi again,
I believe the latest update of the Stenograph USB protocol should support your machine.
- Get the Plover weekly release (4.0.0dev8+)
- Open Plover, then open the "Plugins Manager" tool
- Find plover-stenograph-usb and install it.
- Restart Plover.
- Select "Stenograph USB" as your machine.
It should work, please let me know if you run into issues!
On Sun, Apr 29, 2018, 3:25 PM Ted Morin [email protected] wrote:
On the new version of Plover, the "Plugins Manager" will let you download the Stenograph USB plugin. Then, restart Plover and it should be an option as a machine protocol.
Separately, when using Stentura with Mira Emulation, you should configure it through the Configuration >> Machine window in order to Scan and select Ports.
On Sun, Apr 29, 2018, 2:19 PM sunflowerpirate [email protected] wrote:
@gdwaynewarner https://github.com/gdwaynewarner I've installed the newest version of Plover but I'm still having the same issue, I'm attaching a screenshot of the error I get. [image: screen shot 2018-04-29 at 11 18 24 am] https://user-images.githubusercontent.com/38506597/39409619-1f39712a-4b9f-11e8-89d4-98c74174f05f.png
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/openstenoproject/plover/issues/944#issuecomment-385270644, or mute the thread https://github.com/notifications/unsubscribe-auth/AFkgSjM7McjZcB1hJZt-Fsg6nHuZjA-Fks5ttgQbgaJpZM4TrEoH .
How in the world do I download the latest version? I am on a Mac running High Sierra and for the life of me I cannot figure out which one to run, and how.
We had the same problem and fixed it by bgetting a PC. 😬
On Sun, Jun 24, 2018 at 1:20 PM ashrosedyck [email protected] wrote:
How in the world do I download the latest version? I am on a Mac running High Sierra and for the life of me I cannot figure out which one to run, and how.
[image: screen shot 2018-06-24 at 1 19 53 pm] https://user-images.githubusercontent.com/23143560/41823220-4efa2c18-77b1-11e8-96d3-2cdbcd9c17f8.png
— You are receiving this because you commented.
Reply to this email directly, view it on GitHub https://github.com/openstenoproject/plover/issues/944#issuecomment-399784671, or mute the thread https://github.com/notifications/unsubscribe-auth/AkuQZUfV-McuyQFTvF9tlNdXTPaKinajks5t__SFgaJpZM4TrEoH .
-- Love, Koral
For freedom Christ has set us free; stand firm therefore and do not submit again to a yoke of slavery. Gal 5:1 Give me liberty, or give me death! -Patrick Henry (You Gotta) Fight For Your Right (To Party) -Beastie Boys :)
The DMG is the Mac version.
On Sun, Jun 24, 2018, 4:22 PM sunflowerpirate [email protected] wrote:
We had the same problem and fixed it by bgetting a PC. 😬
On Sun, Jun 24, 2018 at 1:20 PM ashrosedyck [email protected] wrote:
How in the world do I download the latest version? I am on a Mac running High Sierra and for the life of me I cannot figure out which one to run, and how.
[image: screen shot 2018-06-24 at 1 19 53 pm] < https://user-images.githubusercontent.com/23143560/41823220-4efa2c18-77b1-11e8-96d3-2cdbcd9c17f8.png
— You are receiving this because you commented.
Reply to this email directly, view it on GitHub < https://github.com/openstenoproject/plover/issues/944#issuecomment-399784671 , or mute the thread < https://github.com/notifications/unsubscribe-auth/AkuQZUfV-McuyQFTvF9tlNdXTPaKinajks5t__SFgaJpZM4TrEoH
.
-- Love, Koral
For freedom Christ has set us free; stand firm therefore and do not submit again to a yoke of slavery. Gal 5:1 Give me liberty, or give me death! -Patrick Henry (You Gotta) Fight For Your Right (To Party) -Beastie Boys :)
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/openstenoproject/plover/issues/944#issuecomment-399784841, or mute the thread https://github.com/notifications/unsubscribe-auth/AFkgSlBWqffRuKKM8Sni6U9N3-zEMegLks5t__URgaJpZM4TrEoH .
@ashrosed36 I am trying to set up a wave to my macbook, how did you get plover to recognize the usb drivers?
Unfortunately, after scouring the internet, and a lot of false hope I ultimately discovered it couldn’t be done with a Mac. Instead I bought a cheap Dell and used that. Good luck, sorry.
On Mon, Mar 29, 2021 at 12:03 PM githotsko @.***> wrote:
@ashrosed36 https://github.com/ashrosed36 I am trying to set up a wave to my macbook, how did you get plover to recognize the usb drivers?
— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/openstenoproject/plover/issues/944#issuecomment-809547712, or unsubscribe https://github.com/notifications/unsubscribe-auth/AJFZAZKDPGZLTLJA6ANSL33TGCXG5ANCNFSM4E5MJIDQ .
-- Sincerely, Koral
For freedom Christ has set us free; stand firm therefore and do not submit again to a yoke of slavery. Gal 5:1 Give me liberty, or give me death! -Patrick Henry I would rather be exposed to the inconveniences attending too much liberty than to those attending too small a degree of it. -Thomas Jefferson
From the comment right above it should be possible... try following the instruction (download the dmg, install it, install the plugin mentioned)
@githotsko let us know if you need assistance, we've definitely had Waves working over USB on Mac 👍
Thank you, that’s amazing. In 2018 I couldn’t figure it out.
On Mon, Apr 19, 2021 at 1:02 PM Ted Morin @.***> wrote:
@githotsko https://github.com/githotsko let us know if you need assistance, we've definitely had Waves working over USB on Mac 👍
— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/openstenoproject/plover/issues/944#issuecomment-822664966, or unsubscribe https://github.com/notifications/unsubscribe-auth/AJFZAZMLYRPUFXCLEW2U5XDTJRV2PANCNFSM4E5MJIDQ .
-- Sincerely, Koral
For freedom Christ has set us free; stand firm therefore and do not submit again to a yoke of slavery. Gal 5:1 Give me liberty, or give me death! -Patrick Henry I would rather be exposed to the inconveniences attending too much liberty than to those attending too small a degree of it. -Thomas Jefferson