openshwprojects

I improved MQTT stability a bit today but in general - "Flag 2 -[MQTT] Broadcast self state every minute" is NOT reliable now, don't use it

V0 protocol? Which device is that? I assumed that V0 is only for battery powered devices, but I can fix that. Maybe there is some logical error on my side

well that's strange, but ok, I can fix it later today, in about 2 hours from now, would you be able to check?

https://github.com/openshwprojects/OpenBK7231T_App/commit/a3bfaa0c8f68e5433f123f99c68ed1132b2a8ccf please check and close if that's working for you. Thanks for reporting! Nice and fast catch.

No problem, it's very easy. Just remember that first pin is where the dot mark is and then use this diagram:  Also note where the oscillator is (26MHz), it...

What kind of approach are you planning to take with powering it up? If you have 3.3V LDO regulator, then you connect your 3.3V directly to the 3.3V pin. 3.3V...

That's great! If you want to help, please post a short device teardown with the pins marked (which pin is which) in our teardowns section: https://www.elektroda.com/rtvforum/forum507.html Preferrably device model name,...

You are correct. It seems now it's fixed by @iprak

@prak i just realized and fixed that. You pushed to my private fork and the public repo is in openbekeniot ... but should be already fixed, next time please push...

I had similiar device and had to cut the track in order to flash: https://www.elektroda.com/rtvforum/topic3895572.html