IR driver on BL602

[rnrobles]

Describe the bug When trying to use the IR module as a receiver, apparently it does not have that driver enabled with the BL602 chip, is it possible to add it?

Firmware:

• Version 1.17.244
• Device ZJ-bwcd-ir-vc MagicHome
• Chip/model: BL602
• Device config: { "vendor": "Tuya", "bDetailed": "0", "name": "Full Device Name Here", "model": "enter short model name here", "chip": "BL602", "board": "TODO", "flags": "1024", "keywords": [ "TODO", "TODO", "TODO" ], "pins": { "3": "PWM;1", "4": "PWM;0", "12": "IRRecv;1", "21": "PWM;2" }, "command": "", "image": "https://obrazki.elektroda.pl/YOUR_IMAGE.jpg", "wiki": "https://www.elektroda.com/rtvforum/topic_YOUR_TOPIC.html" }