[BUG][HA] BL602 Magic Home not sending all channels for Home assistant Discovery

[arhi3a]

Describe the bug I wanted to add MagicHome RGBW 12V controller (https://www.elektroda.com/rtvforum/topic4024917.html) to HA using discovery via MQTT. Unfortunately it sends only sensor information to HA sensor channel. It does not send information regarding led control or status therefore I can not control device from Home Assistant. It also does not generate preview of configuration payload. To confirm the problem is conncted with BL602 Device i tried configuration on my 2nd module it had same issues but wifi led bulbs (other device) using BK7231N are configured correctly & sending full payload.

From webapp log view:

Info:MQTT:Queued topic=homeassistant/sensor/open_bk_led_5_temp/config, 1 items in queue Info:MQTT:Queued topic=homeassistant/sensor/open_bk_led_5_rssi/config, 2 items in queue Info:MQTT:Queued topic=homeassistant/sensor/open_bk_led_5_uptime/config, 3 items in queue Info:MQTT:Queued topic=homeassistant/sensor/open_bk_led_5_build/config, 4 items in queue Info:MQTT:Queued topic=homeassistant/sensor/open_bk_led_5_ssid/config, 5 items in queue Info:MQTT:Queued topic=homeassistant/sensor/open_bk_led_5_ip/config, 6 items in queue

Firmware:

• Version: 1.18.194 (most current at time of post)
• Device: Magic Home RGBW 12V
• Chipset: BL602
• Device config? PWM pins: P3:0, P4:1, P20:3, P21:2 Flags: 2, 10, 30 mqtt connected Wifi connected

To Reproduce Steps to reproduce the behavior:

1. Go to <IP>/ha_cfg
2. Click Start Home Assistant Discovery

Screenshots Home assistant View (please note no controll options):

[openshwprojects]

This basically looks like RGBW device support request for HA. Or can you try "emulate cool" flag?