New LSC Smart Mood light 3204432

[snakesrules94]

Hi all and happy new year to the community ! I bought today some new smart light from action which afaik is not yet seen on the database :

opening is quite easy by gently cutting the glue around the edge of the refractor and then it comes :

This time , the BK7231N is soldered directly :

The light is recognised in tuya app with fw 2.0.0.

I've tried to flash with TCC by using a 2.0.0 7231N strip profile but without luck ( also no way with the others 2.0.0 7231N profiles ). It seems that the line of 9 solder points on the back of the pcb could be connected for somes to the MCU and could be used as direct access for flashing but i have no time right now to check , i will be off for 15 days

There is also a microphone on the board as this lamp can react to music .

Regards.

[snakesrules94]

I've tried quickly to dump the fw with the lightleak app using the differents profiles but no way. Will go deeper with this stuff when i'll be back.

[openshwprojects]

Thank you for sharing, but usually, we post our teardowns here: https://www.elektroda.com/rtvforum/forum51.html If you want to continue on Github, then ok, just let me know, can I repost your teardown (once it's complete - with template) to our forum?

[snakesrules94]

Hello, Sure ! You can repost on the forum. I’ve just wrote here because i have no account yet on electroda. Will continue on that after my trip. rgds.

[openshwprojects]

Let me know once you get this device flashed and working. Good luck

[snakesrules94]

Hello, here are the latests news . Lamp is now flashed and running the latest Openbeken fw. I've made a push request to TCC for integrating the flashing profile.

template : { "vendor": "Tuya", "bDetailed": "0", "name": "Lsc Smart Mood Light", "model": "3204432", "chip": "BK7231N", "board": "TODO", "flags": "1024", "keywords": [ "TODO", "TODO", "TODO" ], "pins": { "6": "PWM;1", "7": "PWM;2", "14": "Btn_Tgl_All;0", "24": "PWM;3", "26": "PWM;4" }, "command": "", "image": "https://obrazki.elektroda.pl/YOUR_IMAGE.jpg", "wiki": "https://www.elektroda.com/rtvforum/topic_YOUR_TOPIC.html" }

edit : need to investigate the profile (extracted from dump ) as the main back button is not working.

[snakesrules94]

Final template : { "vendor": "Tuya", "bDetailed": "0", "name": "Lsc Smart Mood Light", "model": "3204432", "chip": "BK7231N", "board": "TODO", "flags": "1024", "keywords": [ "TODO", "TODO", "TODO" ], "pins": { "6": "PWM;1", "7": "PWM;2", "14": "Btn;5", "24": "PWM;3", "26": "PWM;4" }, "command": "", "image": "https://obrazki.elektroda.pl/YOUR_IMAGE.jpg", "wiki": "https://www.elektroda.com/rtvforum/topic_YOUR_TOPIC.html" }

Now back power button is working fine.

[openshwprojects]

It's now present here: https://www.elektroda.com/rtvforum/topic4033331.html Thank you, closing as solved