openshift
OCPBUGS-43512: New ManagedBootImages test appears to be failing too often
This test extends the timeout for the following test to 2 minutes, as 30 seconds seems to be too short.
[sig-mco][OCPFeatureGate:ManagedBootImages][Serial] Should degrade on a MachineSet with an OwnerReference [apigroup:machineconfiguration.openshift.io] [Suite:openshift/conformance/serial]
@djoshy: This pull request references Jira Issue OCPBUGS-43512, which is valid. The bug has been moved to the POST state.
3 validation(s) were run on this bug
- bug is open, matching expected state (open)
- bug target version (4.18.0) matches configured target version for branch (4.18.0)
- bug is in the state New, which is one of the valid states (NEW, ASSIGNED, POST)
Requesting review from QA contact: /cc @sergiordlr
The bug has been updated to refer to the pull request using the external bug tracker.
In response to this:
This test extends the timeout for the following test to 2 minutes, as 30 seconds seems to be too short.
[sig-mco][OCPFeatureGate:ManagedBootImages][Serial] Should degrade on a MachineSet with an OwnerReference [apigroup:machineconfiguration.openshift.io] [Suite:openshift/conformance/serial]
Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the openshift-eng/jira-lifecycle-plugin repository.
@djoshy: The following commands are available to trigger required jobs:
/test e2e-aws-jenkins/test e2e-aws-ovn-edge-zones/test e2e-aws-ovn-fips/test e2e-aws-ovn-image-registry/test e2e-aws-ovn-microshift/test e2e-aws-ovn-microshift-serial/test e2e-aws-ovn-serial/test e2e-gcp-ovn/test e2e-gcp-ovn-builds/test e2e-gcp-ovn-image-ecosystem/test e2e-gcp-ovn-upgrade/test e2e-metal-ipi-ovn-ipv6/test images/test lint/test unit/test verify/test verify-deps
The following commands are available to trigger optional jobs:
/test 4.12-upgrade-from-stable-4.11-e2e-aws-ovn-upgrade-rollback/test e2e-agnostic-ovn-cmd/test e2e-aws/test e2e-aws-csi/test e2e-aws-disruptive/test e2e-aws-etcd-certrotation/test e2e-aws-etcd-recovery/test e2e-aws-ovn/test e2e-aws-ovn-cgroupsv2/test e2e-aws-ovn-etcd-scaling/test e2e-aws-ovn-kube-apiserver-rollout/test e2e-aws-ovn-kubevirt/test e2e-aws-ovn-single-node/test e2e-aws-ovn-single-node-serial/test e2e-aws-ovn-single-node-techpreview/test e2e-aws-ovn-single-node-techpreview-serial/test e2e-aws-ovn-single-node-upgrade/test e2e-aws-ovn-upgrade/test e2e-aws-ovn-upgrade-rollback/test e2e-aws-ovn-upi/test e2e-aws-proxy/test e2e-azure/test e2e-azure-ovn-etcd-scaling/test e2e-azure-ovn-upgrade/test e2e-baremetalds-kubevirt/test e2e-external-aws/test e2e-external-aws-ccm/test e2e-external-vsphere-ccm/test e2e-gcp-csi/test e2e-gcp-disruptive/test e2e-gcp-fips-serial/test e2e-gcp-ovn-etcd-scaling/test e2e-gcp-ovn-rt-upgrade/test e2e-gcp-ovn-techpreview/test e2e-gcp-ovn-techpreview-serial/test e2e-metal-ipi-ovn/test e2e-metal-ipi-ovn-dualstack/test e2e-metal-ipi-ovn-dualstack-local-gateway/test e2e-metal-ipi-ovn-kube-apiserver-rollout/test e2e-metal-ipi-serial/test e2e-metal-ipi-serial-ovn-ipv6/test e2e-metal-ipi-virtualmedia/test e2e-metal-ovn-single-node-live-iso/test e2e-metal-ovn-single-node-with-worker-live-iso/test e2e-openstack-ovn/test e2e-openstack-serial/test e2e-vsphere/test e2e-vsphere-ovn-dualstack-primaryv6/test e2e-vsphere-ovn-etcd-scaling/test okd-e2e-gcp/test okd-scos-images
Use /test all to run the following jobs that were automatically triggered:
pull-ci-openshift-origin-master-e2e-agnostic-ovn-cmdpull-ci-openshift-origin-master-e2e-aws-csipull-ci-openshift-origin-master-e2e-aws-ovn-cgroupsv2pull-ci-openshift-origin-master-e2e-aws-ovn-edge-zonespull-ci-openshift-origin-master-e2e-aws-ovn-fipspull-ci-openshift-origin-master-e2e-aws-ovn-kube-apiserver-rolloutpull-ci-openshift-origin-master-e2e-aws-ovn-microshiftpull-ci-openshift-origin-master-e2e-aws-ovn-microshift-serialpull-ci-openshift-origin-master-e2e-aws-ovn-serialpull-ci-openshift-origin-master-e2e-aws-ovn-single-nodepull-ci-openshift-origin-master-e2e-aws-ovn-single-node-serialpull-ci-openshift-origin-master-e2e-aws-ovn-single-node-upgradepull-ci-openshift-origin-master-e2e-aws-ovn-upgradepull-ci-openshift-origin-master-e2e-gcp-csipull-ci-openshift-origin-master-e2e-gcp-ovnpull-ci-openshift-origin-master-e2e-gcp-ovn-rt-upgradepull-ci-openshift-origin-master-e2e-gcp-ovn-upgradepull-ci-openshift-origin-master-e2e-metal-ipi-ovnpull-ci-openshift-origin-master-e2e-metal-ipi-ovn-ipv6pull-ci-openshift-origin-master-e2e-metal-ipi-ovn-kube-apiserver-rolloutpull-ci-openshift-origin-master-e2e-openstack-ovnpull-ci-openshift-origin-master-imagespull-ci-openshift-origin-master-lintpull-ci-openshift-origin-master-unitpull-ci-openshift-origin-master-verifypull-ci-openshift-origin-master-verify-deps
In response to this:
/test ?
Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes-sigs/prow repository.
![openshift-ci[bot] avatar](https://avatars.githubusercontent.com/in/91280?v=4 "Published by a pub.dev verified publisher"){kind=small}
/test e2e-aws-ovn-single-node-techpreview-serial /test e2e-aws-ovn-serial /test e2e-gcp-fips-serial
[APPROVALNOTIFIER] This PR is APPROVED
This pull-request has been approved by: djoshy, yuqi-zhang
The full list of commands accepted by this bot can be found here.
The pull request process is described here
- ~~test/extended/machine_config/OWNERS~~ [djoshy,yuqi-zhang]
Approvers can indicate their approval by writing /approve in a comment
Approvers can cancel approval by writing /approve cancel in a comment
/retest-required
Remaining retests: 0 against base HEAD 83d6c4c3b255ce43dbea5364ca17f4a9aacecebe and 2 for PR HEAD b6e3bab45eb2ed962038ddf13541a86dfb6362a2 in total
/retest-required
Remaining retests: 0 against base HEAD 83d6c4c3b255ce43dbea5364ca17f4a9aacecebe and 2 for PR HEAD b6e3bab45eb2ed962038ddf13541a86dfb6362a2 in total
/retest-required
Remaining retests: 0 against base HEAD 9a6a83bf56952bd58929aa5d68b0986a2ccf4b8c and 1 for PR HEAD b6e3bab45eb2ed962038ddf13541a86dfb6362a2 in total
Job Failure Risk Analysis for sha: b6e3bab45eb2ed962038ddf13541a86dfb6362a2
| Job Name | Failure Risk |
|---|---|
| pull-ci-openshift-origin-master-e2e-metal-ipi-ovn-ipv6 | IncompleteTests Tests for this run (101) are below the historical average (1776): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
/retest-required
Remaining retests: 0 against base HEAD 9a6a83bf56952bd58929aa5d68b0986a2ccf4b8c and 2 for PR HEAD b6e3bab45eb2ed962038ddf13541a86dfb6362a2 in total
@djoshy: The following tests failed, say /retest to rerun all failed tests or /retest-required to rerun all mandatory failed tests:
| Test name | Commit | Details | Required | Rerun command |
|---|---|---|---|---|
| ci/prow/e2e-aws-ovn-single-node-serial | b6e3bab45eb2ed962038ddf13541a86dfb6362a2 | link | false | /test e2e-aws-ovn-single-node-serial |
| ci/prow/e2e-metal-ipi-ovn-kube-apiserver-rollout | b6e3bab45eb2ed962038ddf13541a86dfb6362a2 | link | false | /test e2e-metal-ipi-ovn-kube-apiserver-rollout |
| ci/prow/e2e-aws-ovn-single-node-techpreview-serial | b6e3bab45eb2ed962038ddf13541a86dfb6362a2 | link | false | /test e2e-aws-ovn-single-node-techpreview-serial |
| ci/prow/e2e-aws-ovn-single-node | b6e3bab45eb2ed962038ddf13541a86dfb6362a2 | link | false | /test e2e-aws-ovn-single-node |
| ci/prow/e2e-gcp-fips-serial | b6e3bab45eb2ed962038ddf13541a86dfb6362a2 | link | false | /test e2e-gcp-fips-serial |
Full PR test history. Your PR dashboard.
Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes-sigs/prow repository. I understand the commands that are listed here.
@djoshy: Jira Issue OCPBUGS-43512: All pull requests linked via external trackers have merged:
Jira Issue OCPBUGS-43512 has been moved to the MODIFIED state.
In response to this:
This test extends the timeout for the following test to 2 minutes, as 30 seconds seems to be too short.
[sig-mco][OCPFeatureGate:ManagedBootImages][Serial] Should degrade on a MachineSet with an OwnerReference [apigroup:machineconfiguration.openshift.io] [Suite:openshift/conformance/serial]
Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the openshift-eng/jira-lifecycle-plugin repository.