openshift
DNM/SPLAT-1854: fix: setup platform external as none
This PR is investigating changes affecting platform external clusters making presubmit jobs with permanent failures.
release repo PR: https://github.com/openshift/release/pull/57954
Example of failed job: https://prow.ci.openshift.org/view/gs/test-platform-results/pr-logs/pull/openshift_release/57954/rehearse-57954-pull-ci-openshift-installer-master-e2e-external-aws-ccm/1847341737333231616#1:build-log.txt%3A175-179
Skipping CI for Draft Pull Request.
If you want CI signal for your change, please convert it to an actual PR.
You can still manually trigger a test run with /test all
![openshift-ci[bot] avatar](https://avatars.githubusercontent.com/in/91280?v=4 "Published by a pub.dev verified publisher"){kind=small}
@mtulio: The following commands are available to trigger required jobs:
/test e2e-aws-jenkins/test e2e-aws-ovn-edge-zones/test e2e-aws-ovn-fips/test e2e-aws-ovn-image-registry/test e2e-aws-ovn-microshift/test e2e-aws-ovn-microshift-serial/test e2e-aws-ovn-serial/test e2e-gcp-ovn/test e2e-gcp-ovn-builds/test e2e-gcp-ovn-image-ecosystem/test e2e-gcp-ovn-upgrade/test e2e-metal-ipi-ovn-ipv6/test images/test lint/test unit/test verify/test verify-deps
The following commands are available to trigger optional jobs:
/test 4.12-upgrade-from-stable-4.11-e2e-aws-ovn-upgrade-rollback/test e2e-agnostic-ovn-cmd/test e2e-aws/test e2e-aws-csi/test e2e-aws-disruptive/test e2e-aws-etcd-certrotation/test e2e-aws-etcd-recovery/test e2e-aws-ovn/test e2e-aws-ovn-cgroupsv2/test e2e-aws-ovn-etcd-scaling/test e2e-aws-ovn-kube-apiserver-rollout/test e2e-aws-ovn-kubevirt/test e2e-aws-ovn-single-node/test e2e-aws-ovn-single-node-serial/test e2e-aws-ovn-single-node-techpreview/test e2e-aws-ovn-single-node-techpreview-serial/test e2e-aws-ovn-single-node-upgrade/test e2e-aws-ovn-upgrade/test e2e-aws-ovn-upgrade-rollback/test e2e-aws-ovn-upi/test e2e-aws-proxy/test e2e-azure/test e2e-azure-ovn-etcd-scaling/test e2e-azure-ovn-upgrade/test e2e-baremetalds-kubevirt/test e2e-external-aws/test e2e-external-aws-ccm/test e2e-external-vsphere-ccm/test e2e-gcp-csi/test e2e-gcp-disruptive/test e2e-gcp-fips-serial/test e2e-gcp-ovn-etcd-scaling/test e2e-gcp-ovn-rt-upgrade/test e2e-gcp-ovn-techpreview/test e2e-gcp-ovn-techpreview-serial/test e2e-metal-ipi-ovn/test e2e-metal-ipi-ovn-dualstack/test e2e-metal-ipi-ovn-dualstack-local-gateway/test e2e-metal-ipi-ovn-kube-apiserver-rollout/test e2e-metal-ipi-serial/test e2e-metal-ipi-serial-ovn-ipv6/test e2e-metal-ipi-virtualmedia/test e2e-metal-ovn-single-node-live-iso/test e2e-metal-ovn-single-node-with-worker-live-iso/test e2e-openstack-ovn/test e2e-openstack-serial/test e2e-vsphere/test e2e-vsphere-ovn-dualstack-primaryv6/test e2e-vsphere-ovn-etcd-scaling/test okd-e2e-gcp/test okd-scos-images
Use /test all to run the following jobs that were automatically triggered:
pull-ci-openshift-origin-master-e2e-agnostic-ovn-cmdpull-ci-openshift-origin-master-e2e-aws-csipull-ci-openshift-origin-master-e2e-aws-ovn-cgroupsv2pull-ci-openshift-origin-master-e2e-aws-ovn-edge-zonespull-ci-openshift-origin-master-e2e-aws-ovn-fipspull-ci-openshift-origin-master-e2e-aws-ovn-kube-apiserver-rolloutpull-ci-openshift-origin-master-e2e-aws-ovn-microshiftpull-ci-openshift-origin-master-e2e-aws-ovn-microshift-serialpull-ci-openshift-origin-master-e2e-aws-ovn-serialpull-ci-openshift-origin-master-e2e-aws-ovn-single-nodepull-ci-openshift-origin-master-e2e-aws-ovn-single-node-serialpull-ci-openshift-origin-master-e2e-aws-ovn-single-node-upgradepull-ci-openshift-origin-master-e2e-aws-ovn-upgradepull-ci-openshift-origin-master-e2e-gcp-csipull-ci-openshift-origin-master-e2e-gcp-ovnpull-ci-openshift-origin-master-e2e-gcp-ovn-rt-upgradepull-ci-openshift-origin-master-e2e-gcp-ovn-upgradepull-ci-openshift-origin-master-e2e-metal-ipi-ovnpull-ci-openshift-origin-master-e2e-metal-ipi-ovn-ipv6pull-ci-openshift-origin-master-e2e-metal-ipi-ovn-kube-apiserver-rolloutpull-ci-openshift-origin-master-e2e-openstack-ovnpull-ci-openshift-origin-master-imagespull-ci-openshift-origin-master-lintpull-ci-openshift-origin-master-unitpull-ci-openshift-origin-master-verifypull-ci-openshift-origin-master-verify-deps
In response to this:
/test ?
Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes-sigs/prow repository.
[APPROVALNOTIFIER] This PR is NOT APPROVED
This pull-request has been approved by: mtulio Once this PR has been reviewed and has the lgtm label, please assign bertinatto for approval. For more information see the Kubernetes Code Review Process.
The full list of commands accepted by this bot can be found here.
Approvers can indicate their approval by writing /approve in a comment
Approvers can cancel approval by writing /approve cancel in a comment
@mtulio: This pull request references SPLAT-1854 which is a valid jira issue.
Warning: The referenced jira issue has an invalid target version for the target branch this PR targets: expected the task to target the "4.18.0" version, but no target version was set.
In response to this:
This PR is investigating changes affecting platform external clusters making presubmit jobs with permanent failures.
release repo PR: https://github.com/openshift/release/pull/57954
Example of failed job: https://prow.ci.openshift.org/view/gs/test-platform-results/pr-logs/pull/openshift_release/57954/rehearse-57954-pull-ci-openshift-installer-master-e2e-external-aws-ccm/1847341737333231616#1:build-log.txt%3A175-179
Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the openshift-eng/jira-lifecycle-plugin repository.
Tests failed for the same reason detected on https://github.com/openshift/release/pull/57954, probably we'll need to define the REGISTRY_AUTH_FILE in the workflow level to make openshift-tests consume pull secret with CI registry credentials.
I am testing a version forcing the creds pointing to a file which those creds are exported in e2e-external-aws workflow. If it works, I will define the var in wokrflow level and test in a new PR on release repo.
/test e2e-external-aws-ccm
Also testing the new skips mentioned in my last comment.
/test e2e-external-aws-ccm
@mtulio: The following test failed, say /retest to rerun all failed tests or /retest-required to rerun all mandatory failed tests:
| Test name | Commit | Details | Required | Rerun command |
|---|---|---|---|---|
| ci/prow/e2e-external-aws-ccm | 58ec05e34063dc33811c5a128cbb19205889f169 | link | false | /test e2e-external-aws-ccm |
Full PR test history. Your PR dashboard.
Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes-sigs/prow repository. I understand the commands that are listed here.
Job Failure Risk Analysis for sha: 58ec05e34063dc33811c5a128cbb19205889f169
| Job Name | Failure Risk |
|---|---|
| pull-ci-openshift-origin-master-e2e-external-aws-ccm | Medium [sig-sippy] install should not timeout This test has passed 93.05% of 417 runs on release 4.18 [Architecture:amd64 FeatureSet:default Installer:ipi Network:ovn NetworkStack:ipv4 Platform:aws SecurityMode:default Topology:ha Upgrade:none] in the last week. --- [sig-sippy] install should work This test has passed 91.71% of 362 runs on release 4.18 [Architecture:amd64 FeatureSet:default Installer:ipi Network:ovn NetworkStack:ipv4 Platform:aws SecurityMode:default Topology:ha Upgrade:none] in the last week. |
