openlumi.github.io icon indicating copy to clipboard operation
openlumi.github.io copied to clipboard
verified publisher icon openlumi

MacOs Ventura

Open leovj opened this issue 1 year ago • 6 comments

I performed the procedure from Macos Ventura 13.6.7. the gateway is in resetting mode ... but when I enter the command

uuu aqara_zhwg11lm.uuu

from the terminal it returns:

Wait for Known USB Device Appear..

Can you give me some solution?

leovj avatar May 26 '24 12:05 leovj

Probably you don't have permissions. Try run uuu with sudo

devbis avatar May 26 '24 17:05 devbis

iMac-di-Leonardo:uuu-openwrt-23.05.2 leo$ sudo uuu aqara_zhwg11lm.uuu Password: uuu (Universal Update Utility) for nxp imx chips -- libuuu_1.5.165-0-g7347a80

Wait for Known USB Device Appear...

leovj avatar May 27 '24 16:05 leovj

U-Boot 2020.04 (Oct 24 2021 - 09:01:35 +0000)

CPU: Freescale i.MX6ULL rev1.1 528 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C) at 35C Reset cause: POR Model: Xiaomi Lumi Gateway Board: DGNWG05LM DRAM: 256 MiB NAND: 256 MiB MMC: FSL_SDHC: 0 Loading Environment from NAND... *** Warning - bad CRC, using default environment

In: serial@2020000 Out: serial@2020000 Err: serial@2020000 Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 0 Lumi iMX6ULL #

leovj avatar May 27 '24 18:05 leovj

Did you solder all 7 wires? 3 for uart and 4 for USB?

devbis avatar May 28 '24 07:05 devbis

Did you solder all 7 wires? 3 for uart and 4 for USB?

Yes!

leovj avatar Jun 01 '24 08:06 leovj

I did something really stupid, I tried to update the system from openwrt, probably loading the wrong ISO. The hub now restarts continuously and I would like to return everything to its previous state. But I can not. With the procedure it seems that it doesn't "feel" the USB port..

leovj avatar Jun 01 '24 08:06 leovj