openhab-syno-spk
openhab-syno-spk copied to clipboard
openhab
SPK package for 3.00
You can convert it on your own, spk ist just a renamed tar.gzip Within the openhab-syno-spk-3.0.0.00.tar.gz there is a openhab-syno-spk-3.0.0.000 folder with the conf, scripts, WIZARD_UIFILES subfolders etc. needed by the Package Center in it. Exctract this folder with e.g. 7zip to some temporary folder, select the content and make a tar.gz out of the it (again with 7zip). Then just rename it to *.spk, Package Center will recognize this as a valid package.
Perfect ! It's working. But now I hav new issue : I can't access to the interface @ 192.168.1.XXX:8080 Any idea ? openhab.log
Could be that 8080 is already used by some other app. I change the port to 8180 if necessary but mainly use the 8443 port for https access. Did you start openHAB manually or via the DSM ?
What I have done : 1° I already had version 2.5 installed on my Synology, with access thanks to port 8080 2° In order not to loose my configuration, I did not uninstall previous version, but only install the 3.0 version with .SPK file 3° Package was sucessufully installed, it starts automatically 4° I tried to access to OpenHab with IP address and port 8080 (I kept the same), but I faced an error : "connection not allowed"
After, I tried to retard package, to uninstall it, to reinstall version 2.5 (same connection issue) I tried also to delete folders, but still the same connection issue....
Did you reset the certificate in the browser ? After reinstallation, openhab creates a new certificate for the https access over port 8443. If you have accepted the old, self signed certificate it will not match the new one and the browser will not access openhab
I think I need java11 by I don't konw how to install it. Can anyone help me ?
Here is the error message in the log file : 2021-03-30 14:32:05.252 [ERROR] [ternal.service.BootFeaturesInstaller] - Error installing boot features org.apache.felix.resolver.reason.ReasonException: Unable to resolve root: missing requirement [root] osgi.identity; osgi.identity=openhab-runtime-base; type=karaf.feature; version="[3.0.1,3.0.1]"; filter:="(&(osgi.identity=openhab-runtime-base)(type=karaf.feature)(version>=3.0.1)(version<=3.0.1))" [caused by: Unable to resolve openhab-runtime-base/3.0.1: missing requirement [openhab-runtime-base/3.0.1] osgi.identity; osgi.identity=openhab-core-model-item; type=karaf.feature [caused by: Unable to resolve openhab-core-model-item/3.0.1: missing requirement [openhab-core-model-item/3.0.1] osgi.identity; osgi.identity=org.openhab.core.model.item; type=osgi.bundle; version="[3.0.1,3.0.1]"; resolution:=mandatory [caused by: Unable to resolve org.openhab.core.model.item/3.0.1: missing requirement [org.openhab.core.model.item/3.0.1] osgi.wiring.package; filter:="(&(osgi.wiring.package=org.openhab.core.common.registry)(version>=3.0.0)(!(version>=4.0.0)))" [caused by: Unable to resolve org.openhab.core/3.0.1: missing requirement [org.openhab.core/3.0.1] osgi.ee; filter:="(&(osgi.ee=JavaSE)(version=11))"]]]]
I hope there will come up a solution, I've got exactly the same problem !
Same problem here too : no SPK and I can't install because port 8080 is already in use... Please just change it :(
You can convert it on your own, spk ist just a renamed tar.gzip Within the openhab-syno-spk-3.0.0.00.tar.gz there is a openhab-syno-spk-3.0.0.000 folder with the conf, scripts, WIZARD_UIFILES subfolders etc. needed by the Package Center in it. Exctract this folder with e.g. 7zip to some temporary folder, select the content and make a tar.gz out of the it (again with 7zip). Then just rename it to *.spk, Package Center will recognize this as a valid package.
I don't understand why there is no .spk file in Releases for 3.0.0, if it is trivial to make one, can some one please just make one available on the Releases page?
Instructions here are confusing, do I need to download the .tar.gz and then take some inner folder and make another tar.gz, or do I just download .tar.gz from Releases page and rename it to .spk?
Has this really been open since March and nobody bothered to just create the SPK file and put it on the Releases page? Do you need volunteers for this task
i have the same issue, so created the spk manually as nstructions above, but i get error below but i dont have anything tunning on my synology on port 8080 or 8443
whats wrong?
