Openconfig Path Question

[gavmckee80]

I'm using gnmi-gateway (details below)

./gnmi-gateway --version
gnmi-gateway version v0.11.1-002a9b0 (Built 2021-08-23T22:15:23Z)

I'm trying to figure out how to translate an Openconfig path into my configuration.

If I use gnmic tool as follows :

root@XXXX-XXXX-logs:~# gnmic -a <hostname>:6030 -u <user> -p <password> --insecure subscribe --path "/interfaces/interface/state/counters" --stream-mode on_change > output.txt
^Croot@XXXX-XXXX-logs:~# tail output.txt 
    {
      "Path": "interfaces/interface[name=Management1]/state/counters/out-unicast-pkts",
      "values": {
        "interfaces/interface/state/counters/out-unicast-pkts": 237966235
      }
    }
  ]
}

You can see I get output

In my gnmi-gateway configuration file

{
  "request": {
    "default": {
      "subscribe": {
        "prefix": {
        },
        "subscription": [
          {
            "path": {
              "elem": [
                {
                  "name": "/interfaces/interface/state/counters"
                }
              ]
            }
          }
        ]
      }
    }
  },
  "target": {
    "<host>": {
      "addresses": [
        "<host>:6030"
      ],
      "credentials": {
        "username": "xxxxxx",
        "password": "xxxxxx"
      },
      "request": "default",
      "meta": {
        "NoTLSVerify": "yes"
      }
    }

  }
}

When using that same path I get

{"level":"info","time":"2021-08-23T18:22:58-07:00","message":"Target <host>.gh.st: Disconnected"}
E0823 18:22:58.050605   71921 reconnect.go:114] client.Subscribe (target "<host>.st") failed: rpc error: code = InvalidArgument desc = failed to subscribe to /\/interfaces\/interface\/state\/counters: path invalid: failed to access node "/interfaces/interface/state/counters" in node ""; reconnecting in 1.040217184s
INFO: 2021/08/23 18:22:58 [transport] transport: loopyWriter.run returning. connection error: desc = "transport is closing"

Can you advise how I use more specific paths ?

[colinmcintosh]

Hi @gavmckee80! The value of elem is a list of each of the elements between the slashes in the xpath-style string that you would use with gNMIc. For /interfaces/interface/state/counters it would look something like:

{
  "request": {
    "default": {
      "subscribe": {
        "prefix": {
        },
        "subscription": [
          {
            "path": {
              "elem": [
                {
                  "name": "interfaces"
                },
                {
                  "name": "interface"
                },
                {
                  "name": "state"
                },
                {
                  "name": "counters"
                }
              ]
            }
          }
        ]
      }
    }
  },
  "target": {
    "<host>": {
      "addresses": [
        "<host>:6030"
      ],
      "credentials": {
        "username": "xxxxxx",
        "password": "xxxxxx"
      },
      "request": "default",
      "meta": {
        "NoTLSVerify": "yes"
      }
    }

  }
}

You're also able to use xpath-style paths with the "simple" Target Loader in gnmi-gateway. For example your simple config file would look something like:

connection:
  my-router:
    addresses:
      - my-router.test.example.net:9339
    credentials:
      username: myusername
      password: mypassword
    request: default
    meta:
      NoTLSVerify: yes
request:
  default:
    paths:
      - /interfaces/interface/state/counters

[gavmckee80]

@colinmcintosh , thanks for coming back to me - this is a great project and saves me writing a bunch of code :D , which is even better.

I'll probably load from Netbox at some point , I'm just trying to get all the components to work , Clustering etc.

Another question on paths first.

I have two seperate requestss defined , one for Arista (eos) and one for Palo Alto (panos).

The second path in eos is to get the CPU stats

Again testing

gnmic -a arista-sw1:6030 -u eos -p password --insecure subscribe --path "components/component/cpu" --stream-mode on_change
{
  "source": "arista-sw1:6030",
  "subscription-name": "default-1629846458",
  "timestamp": 1629847029458359290,
  "time": "2021-08-24T23:17:09.45835929Z",
  "updates": [
    {
      "Path": "components/component[name=CPU0]/cpu/utilization/state/instant",
      "values": {
        "components/component/cpu/utilization/state/instant": 6
      }
    }
  ]
}
........

When I spin up the GNMI GW I don't seem to get the CPU related output.

{
    "request": {
      "eos": {
        "subscribe": {
          "prefix": {
          },
          "subscription": [
            {
              "path": {
                "elem": [
                  {
                    "name": "interfaces"
                  },
                  {
                  "name": "interface"
                  },
                  {
                  "name": "state"
                  },
                  {
                  "name": "counters"
                  }
                ]
              }
            },
            {
              "path": {
                "elem": [
                  {
                    "name": "components"
                  },
                  { 
                    "name": "component"
                  },
                  {
                    "name": "cpu"
                  }
                ]
              }
            }
          ]
        }
      },
      "panos": {
        "subscribe": {
          "prefix": {
          },
          "subscription": [
            {
              "path": {
                "elem": [
                  {
                    "name": "interfaces"
                  },
                  {
                  "name": "interface"
                  },
                  {
                  "name": "state"
                  },
                  {
                  "name": "counters"
                  }
                ]
              }
            }
          ]
        }
      }
  
    },
    "target": {
      "arista-sw1": {
        "addresses": [
          "arista-sw1:6030"
        ],
        "credentials": {
          "username": "eos",
          "password": "password"
        },
        "request": "eos",
        "meta": {
          "NoTLSVerify": "yes"
        }
      }
      },
      "panos-fw1": {
        "addresses": [
          "panos-fw1:9339"
        ],
        "credentials": {
          "username": "panos",
          "password": "password"
        },
        "request": "panos",
        "meta": {
          "NoTLSVerify": "yes"
        }
      }
}

Is there a way to set the origin for a request also ? Something like .... gnmi -addr arista-sw1:6030 -username admin
get origin=eos_native '/Kernel/proc/cpu/utilization/total'