QoS -1.2 - DSCP trust classification

[charantejag504]

QoS -1.2 - DSCP trust classification

• Configure DUT with ingress and egress routed interfaces. • Configure “DSCP trust” feature for applicable vendors on the DUT ingress interface. • Look up and record device default queue classification maps. • One-by-one send flows containing every IPv4 TOS and IPv6 TC value in the classification table • For every flow sent verify that the flow is placed into correct egress interface queues, with the mapping matching to the device's classification map. • verify that the DUT does not change traffic marking. • verify that no traffic drops in all flows.

This resolves https://github.com/openconfig/featureprofiles/issues/1621

[OpenConfigBot]

Pull Request Functional Test Report for #1873 / 4d48560ef5075f8070271028228f81eaa97e3245

Virtual Devices

Device	Test	Test Documentation	Job	Raw Log
Arista cEOS		QOS-1.2: DSCP trust classification test
Cisco 8000E		QOS-1.2: DSCP trust classification test
Cisco XRd		QOS-1.2: DSCP trust classification test
Juniper ncPTX		QOS-1.2: DSCP trust classification test
Nokia SR Linux		QOS-1.2: DSCP trust classification test
Openconfig Lemming		QOS-1.2: DSCP trust classification test

Hardware Devices

Device	Test	Test Documentation	Raw Log
Arista 7808		QOS-1.2: DSCP trust classification test
Cisco 8808		QOS-1.2: DSCP trust classification test
Juniper PTX10008		QOS-1.2: DSCP trust classification test
Nokia 7250 IXR-10e		QOS-1.2: DSCP trust classification test

Help

[coveralls]

Pull Request Test Coverage Report for Build 9391906114

Details

• 0 of 0 changed or added relevant lines in 0 files are covered.
• No unchanged relevant lines lost coverage.
• Overall coverage remained the same at 55.5%

---

Totals
Change from base Build 9382230527:	0.0%
Covered Lines:	1983
Relevant Lines:	3573

---

💛 - Coveralls