onlaj
onlaj
Hey. Your wiring looks wrong, check this site: https://tutorials-raspberrypi.com/connect-control-raspberry-pi-ws2812-rgb-led-strips/ There are 5 cables coming from led strip but in this setup we only use red green and white set, you...
GND should be connected both to RPI and led strip, you need to put led strip's GND wire to socket.
Hello. https://github.com/onlaj/Piano-LED-Visualizer/issues/349#issuecomment-1109641040 I will try to fix that in future updates, for now try this workaround.
Type: `sudo crontab -e`
Just press CTRL + C
Are you trying to run script manually now or are those logs from the start-on-boot script?
Then don't worry about it. If it's the same case as in the other issue, then it's an error caused by the script trying to run before getting a wifi...
You need to use multicolor mode, just set a color for each key. There is no support for coloring specific key in scale yet.
You go yo Key range1 and set a range, for example: Start: 50 End: 50 In RGB Color1 you set a color. You do it for every key. I recommend...
https://github.com/onlaj/Piano-LED-Visualizer#web-interface