Kristoff Bonne

Results 16 comments of Kristoff Bonne

RT3S / MD-UV380 frequency offset at the beginnen of a M17 transmission

![Screenshot from 2024-03-04 22-50-49](https://github.com/OpenRTX/OpenRTX/assets/868523/93e8161c-94a1-4402-8688-4a2fb5a13571) FFT screenshot of the signal during timestamp < 403 ms

RT3S / MD-UV380 frequency offset at the beginnen of a M17 transmission

![Screenshot from 2024-03-04 22-50-30](https://github.com/OpenRTX/OpenRTX/assets/868523/b8f4fe8f-451a-4ef9-b39d-582d7274bc16) FFT screenshot of the signal (preamble) after timestamp 403 ms

RT3S / MD-UV380 transmitter stops before and of final frame of M17 transmission

![Screenshot from 2024-03-03 18-22-02](https://github.com/OpenRTX/OpenRTX/assets/868523/a20191a8-733f-49ad-9987-c1ba01f4b7c4) Screenshot of the end of a transmission of a debug stream which contains 2 EoT frames. Note that the transmission stops before the final trame is...

Registers for 80MHz Koolertron - 23 is 13

Hi Joe, It has been a long time, but as far as I remember, the 'trick' I used is that I ran the windows application to control the JDS6600 with...

Channel enable/disable started behaving weird...

Hi, On 17.01.22 15:49, DrBwts wrote: > > It was all working fine before Xmas but now whenever I uses > |j.setchannelenable(True, True)| the channels sometimes turn on & off...

Channel enable/disable started behaving weird...

Hi, On 18.01.22 15:10, DrBwts wrote: > > All the commands return the exception. When I put them in a |try: .. > except: ...| they all do their jobs...